|
|
06-15-2012, 07:11 PM
|
#3 |
|
VIP Member
Join Date: Oct 2008
Location: Somerset,Ky
Posts: 1,371
Likes: 352
Liked 304 Times in 102 Posts
|
Re: TRW piston clearance?
What Billy said is right, I have ran them at .003. Usaully as example say it was a 350+ .030 skirt measured 4.026 then it was made to be @.004 min.
If pistons have been ran be sure to check skirts were bad to be collasped on those pistons Mike Taylor 3601 |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode