sst reaction times

[cal]

Originally Posted by EVIL CLOWN

We just starting out and reaction times out of 3 run were .55-.49-.40 with no delay car has about 6 to 7 inches of travel in the front end and we are on the stop at .010 its got a pro tree brake and its on the faster side for sst . I was thinking about taken some of the travel out or making the stop come on later. Thanks for any help

Hello
I am by no means an expert of any kind.
With that said. I would limit the travel in the front end as much as possible,
so the car react quicker.
Also what RPM are you leaving at? Raising the RPM may also get the job done for you.

Still a Rookie
Cal
HR 1177

[jmcarter]

What kind of front and rear suspension are you running? Weight of the car can have a bearing as well...particularly if very heavy and a PG with 1.76 or 1.82 first gear...

[HR9121]

Weight of car, first gear ratio, converter stall and launch rpm info would be helpful to give you some feedback with.

[Keith 944]

take the .01 out and make it .1 or more, see what that does first...

[THE LEGEND]

Keith, I was thinking the same thing. I did that once by accident and could'nt figure why I had lost so much in R.T. LOL

[jim cilento]

I have a stock front end back half ladder bar car that will run 10.00 about 3000 lbs
very loose conveter

I have found the best for me is .5 before the stop to be able to have around .04 in the box so in case I am having a slow day or at a track (like cecil d-1 race ) with only .005 in the box to go 00.
my 2 cents jim
I

[Keith 944]

Originally Posted by THE LEGEND

Keith, I was thinking the same thing. I did that once by accident and couldn't figure why I had lost so much in R.T. LOL

yep, at the Mir sportsman spectacular i was at .02 out, just could not get out of beams, bad lights, changed it to .2 out = wheel stand, found .1 works for me with no wheelie and back to decent rts and consistant 60's.....