Timer 2 caculation

Rick Bailey · 09-15-2012, 01:37 AM

Yes , as RR said I can do the same for you.

I also would like to know what your stop rpm is, this is where the big ratio number may be coming from, again depending on your combo this number will be in the range of 3800 - 4400

the math is , a standard equation, ratio number x et change, however you must have the correct ratio.

Then your next step is change in the air .... but we'll go one step at a time

Rick

09-15-2012, 01:37 AM	#7
Rick Bailey Senior Member Join Date: Sep 2002 Posts: 502 Likes: 5 Liked 10 Times in 7 Posts	Re: Timer 2 calculation Yes , as RR said I can do the same for you. I also would like to know what your stop rpm is, this is where the big ratio number may be coming from, again depending on your combo this number will be in the range of 3800 - 4400 the math is , a standard equation, ratio number x et change, however you must have the correct ratio. Then your next step is change in the air .... but we'll go one step at a time Rick __________________ Rick Bailey 3439 SC Last edited by Rick Bailey; 09-15-2012 at 01:41 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode