Under the index for under a grand!

[jmantle]

Originally Posted by Billy Nees

Well, the engine is on hold till I get back from Fla.. It seems that I may have had an attack of CRS and can't remember which cams went where! At any rate, I'll be sending an old cam core out to be re-ground when I get back(dime rocket tip of the week!).
So, let's talk torque converters today. First, a little bit of personal commentary, beyond the motor, there is more to be gained(IMHO) in the correct torque converter than anything else in the car(assuming the car is right). Now I already know that this car is going to want a tight 8" converter but it isn't in my budget(maybe later).
Back in the 70s the hot lick for going fast cheap was to go and get a "Vega" or "Pinto" converter. They were very inefficient and fragile but they were fairly fast and easy to find. Not so in the 21st century so I actually had a converter made, cheap. I already know that my combo makes very good torque for a small motor as I ran my GP with the race motor and a stock converter for a couple of weeks before getting a good one. My car actually ran a tenth under with the stock one but it's got a bit more motor in it. Through a friend in the transmission business, I contacted a (stock) converter rebuilder and asked him what my options were. He looked up my stock converter and found it to have a 1600(that's right) RPM stall and figured that by mixing and matching some stock parts and assembling it with the widest tolorances he could get me about 2800-3000 RPM. Price? $80, for that I'll give it a try.
Now I want to be perfectly clear here, my car picked up a half of a second by putting the correct race converter in the car so the money spent is well worth it but this is being done on a strict budget and if it doesn't work, shame on me.
I'll be back in a week!

Billy, cheap convertor for a 200, get one from a 76 Chevette. They came with a 200 and use an 8" convertor. You will need to do a little adapting on the front end but nothing serious.

Jim Mantle V/SA 6632