my therapy

[FED 387]

ED --looking at the interior shot of the wagon is all that aluminized insulation/sound deadener OEM did the factory really put that in or is this your idea???

[Keith 944]

cute photo-bomber in picture : IMG_0014[1].JPG (5 of 6)
look at top of shock tower...

[Ed Fernandez]

Originally Posted by Keith 944

cute photo-bomber in picture : IMG_0014[1].JPG (5 of 6)
look at top of shock tower...

That's Chops,my daughter and son in laws pup.They're staying with us till they find a home in NJ.He's my buddy,follows me everywhere.And he's a Red Sox fan too.

[Ed Fernandez]

Originally Posted by FED 387

ED --looking at the interior shot of the wagon is all that aluminized insulation/sound deadener OEM did the factory really put that in or is this your idea???

That's 3/16" insulation from Lowes.Very easy to work with.Forms around contours by slitting and using spray adhesive.I trailered the car to upstate NY and back (310 miles R/T) with no glass in the car.Not one area (floor or inner roof) came loose.And I was going 60-65 mph most of the trip.The insulation and adhesive was less than $100.Take that Dynamat.

[Tom keedle]

is that the bubble pack stuff? if so you just as well replace it now, doesn't work worth a damn on the floor...

[Ed Fernandez]

Originally Posted by Tom keedle

is that the bubble pack stuff? if so you just as well replace it now, doesn't work worth a damn on the floor...

A friend used it in his 49 merc.Also installed it in about 10 other cars during builds.Never had a complaint about this stuff.

[Dennis P Chapman]

About time you got the wagon painted Ed looks good.

[Tom keedle]

Originally Posted by Ed Fernandez

A friend used it in his 49 merc.Also installed it in about 10 other cars during builds.Never had a complaint about this stuff.

I used it in my 46 COE and the bubbles popped from foot traffic.
just tellin' ya...

now, the jute back stuff is fine..

[Ed Fernandez]

Hung the fenders on the mustang for a trial fit.Going to need a bit of jacking around to line them up.Waiting for a friend who's been there before.
Also installed the the pass. side mouldings.Couldn't find the small qtr. panel end spears.After a session of speaking in tongues I finally found them.Had to move cars out of driveway to push the wagon out and turn it around in the street, then put cars back in order.
My back is still feeling the effects.Ran some wires to the general area they'll be connected at eventually.Pictures to follow.
Am I the only dope who waits till he's 68 years old to take on two projects like this???????

[Harry 6674]

Originally Posted by Ed Fernandez

Hung the fenders on the mustang for a trial fit.Going to need a bit of jacking around to line them up.Waiting for a friend who's been there before.
Also installed the the pass. side mouldings.Couldn't find the small qtr. panel end spears.After a session of speaking in tongues I finally found them.Had to move cars out of driveway to push the wagon out and turn it around in the street, then put cars back in order.
My back is still feeling the effects.Ran some wires to the general area they'll be connected at eventually.Pictures to follow.
Am I the only dope who waits till he's 68 years old to take on two projects like this???????

You can feel better that your not alone. I've got a few lined up myself and one is a 4104 Grey Hound bus. Gotta keep busy.