How does a Throttle Stop know it's a burnout

Rich Biebel · 02-18-2014, 06:04 PM

A Dedenbaer electric plate stop needs to be powered to be wide open.

In the old days when we used those stops with no timer.....I had a toggle switch to power it on the burnout....so it would be wide open.....that circuit just over rode the other normal circuit....

after that it was powered thru a switch on the shifter....wide open in low gear only....

If you are taking power away during the burnout the blades will close....

02-18-2014, 06:04 PM	#6
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,319 Likes: 25 Liked 551 Times in 215 Posts	Re: How does a Throttle Stop know it's a burnout A Dedenbaer electric plate stop needs to be powered to be wide open. In the old days when we used those stops with no timer.....I had a toggle switch to power it on the burnout....so it would be wide open.....that circuit just over rode the other normal circuit.... after that it was powered thru a switch on the shifter....wide open in low gear only.... If you are taking power away during the burnout the blades will close.... __________________ Rich Biebel S/C 1479 Stock 147R

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode