'67 Camaro E/SA redo

bigsixman · 03-02-2014, 11:14 PM

Tough luck Rich with the Moser perches. We have always braced the original 12 bolt GM perches and never had a problem. There is no question in my mind that the Moser perch is an inferior part. That perch should have not crushed, we used to pull the GM ones loose from the tubes until we braced them, but they never crushed.

Smith Racecraft makes a first class perch designed for racing that you can order for a stock height or 1" lowered built into the perch. They are a nice piece that you may want to check out.

03-02-2014, 11:14 PM	#11
bigsixman Member Join Date: Sep 2012 Location: Crookston, MN Posts: 157 Likes: 8 Liked 2 Times in 2 Posts	Re: '67 Camaro E/SA redo Tough luck Rich with the Moser perches. We have always braced the original 12 bolt GM perches and never had a problem. There is no question in my mind that the Moser perch is an inferior part. That perch should have not crushed, we used to pull the GM ones loose from the tubes until we braced them, but they never crushed. Smith Racecraft makes a first class perch designed for racing that you can order for a stock height or 1" lowered built into the perch. They are a nice piece that you may want to check out. __________________ 1969 camaro, pump gas 540"bbc, jerico 1967 camaro, pump gas efi 620", coan t-400

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode