Oil pan heaters

Bill Baer · 01-14-2015, 06:23 PM

I run methanol And I have a Moroso heater in the pan and two block Heaters in the block. You'll really appreciate them when the temp drops below 60 degrees I can plug them all in and get the motor up to 100 degrees in about 1/2 hour. They also shorten the warm up time as well.

I have had no problems with oil sludging in the pan but I've never left them on overnight.
If you put a vacuum pump on it you can eliminate the "milking up" the oil too.

01-14-2015, 06:23 PM	#4
Bill Baer Senior Member Join Date: Jul 2007 Location: Nothern IL Posts: 596 Likes: 1 Liked 1 Time in 1 Post	Re: Oil pan heaters I run methanol And I have a Moroso heater in the pan and two block Heaters in the block. You'll really appreciate them when the temp drops below 60 degrees I can plug them all in and get the motor up to 100 degrees in about 1/2 hour. They also shorten the warm up time as well. I have had no problems with oil sludging in the pan but I've never left them on overnight. If you put a vacuum pump on it you can eliminate the "milking up" the oil too. __________________ Bill Baer 3391 SC, 339B SC, QR Last edited by Bill Baer; 01-14-2015 at 06:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode