Master Cly Install Help

Tom Meyer · 02-15-2015, 10:55 AM

Today I used a thread gauge to it and they are both 20 pitch with one being 1/2 rear the other is 9/16 front. I am looking for flare nuts to go onto the lines themselves no AN. As far as the 1/4 to the rear for the drum brakes that was the way it was since I have had the car [1983]. The master is a lite weight Chrysler unit with the Lamb no drop out rod. The local NAPA store did not show any. I will look at the dorman site to see if I can find some thing. Thanks for all the help. Tom

02-15-2015, 10:55 AM	#6
Tom Meyer Senior Member Join Date: Aug 2003 Location: Pierce NE Posts: 936 Likes: 78 Liked 354 Times in 120 Posts	Re: Master Cly Install Help Today I used a thread gauge to it and they are both 20 pitch with one being 1/2 rear the other is 9/16 front. I am looking for flare nuts to go onto the lines themselves no AN. As far as the 1/4 to the rear for the drum brakes that was the way it was since I have had the car [1983]. The master is a lite weight Chrysler unit with the Lamb no drop out rod. The local NAPA store did not show any. I will look at the dorman site to see if I can find some thing. Thanks for all the help. Tom __________________ Tom Meyer 5240 SS Stock ???

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode