|
![]() |
#22 |
Member
Join Date: Jun 2007
Location: Federal Way, WA
Posts: 238
Likes: 38
Liked 160 Times in 51 Posts
|
![]()
Rich,
Also make sure your injector ground is connected to the engine and your engine has a good ground strap to the firewall. EFI needs good grounds! The main computer ground should be clean and tight as well and should be on the driver side front inner fender below starter relay. The ground for the injector harness usually goes on a upper bell housing bolt.
__________________
Brian Thompson NHRA Stock / Super Stock Class P/SA 6665 SS/MA 6665 |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|