Onan Marquis Gold 7000

Sean Marconette · 06-20-2015, 03:31 PM

Dan,

With Rich's help I was able to resolve the problems on my Marquis Gold 7000. I had replaced the control module with the factory replacement. A few years later same issue but worse, as the generator would not restart until everything was back down to ambient temp. I then replaced the control module with the ASAP. Problem solved. I had codes that were misleading with the OEM module.

If you are bored,
http://classracer.com/classforum/showthread.php?t=41189

Sean

06-20-2015, 03:31 PM	#4
Sean Marconette Senior Member Join Date: Mar 2006 Posts: 980 Likes: 801 Liked 282 Times in 78 Posts	Re: Onan Marquis Gold 7000 Dan, With Rich's help I was able to resolve the problems on my Marquis Gold 7000. I had replaced the control module with the factory replacement. A few years later same issue but worse, as the generator would not restart until everything was back down to ambient temp. I then replaced the control module with the ASAP. Problem solved. I had codes that were misleading with the OEM module. If you are bored, http://classracer.com/classforum/showthread.php?t=41189 Sean __________________ Sean Marconette 84 Mustang 5060 SS/N

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode