|
|
![]() |
#1 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
Thanks Tommy.
This was after the Winternationals in 1972 where I won SS/GA class and broke out on the brakes first round of eliminations. I stayed out there 5 weeks and raced at Bakersfield and Las Vegas and made one run at Orange County with an 11.18 ET on a 11.43 record. Alex Walordy was doing a story that come out in Rodder and Super Stock magazine Sept. 1972. In that photo I was on top of I-10 trying to get the wheels off the ground for the magazine story. That photo did appear in the magazine and again in Mustangs & Fords magazine in December 2007.
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Feb 2009
Posts: 51
Likes: 38
Liked 11 Times in 4 Posts
|
![]()
Rusty,
Do you think you will finally get to race your Fairlane in 2016? Been a long time coming. Any updates? Going to start on my Fairlane Wagon over the Winter. Mike |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
I would like to race it at the NMCA race in Bradenton next year if possible. It's sitting in storage at this time. My problem is time and money.
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
At this time I have decided to put together a 428 from a lot of the left over parts I have and race the Fairlane in Nostalgia Super Stock at NMCA events. I can always build an NHRA legal SS engine at a later date.
![]()
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,651
Likes: 8
Liked 33 Times in 16 Posts
|
![]()
You will have a blast with NMCA Rusty.
![]()
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 12-12-2015 at 04:04 PM. |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2007
Posts: 260
Likes: 21
Liked 87 Times in 19 Posts
|
![]()
I still need a few parts but I have a few new parts: JPT converter and C4 for an FE, strange center section with a 4:86 and 35 spline spool and Hooker race headers.
__________________
Rusty Gillis Former NHRA SS/FA and SS/GA record holder |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Nov 2015
Posts: 47
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Doing a Great Job on the build so far!
__________________
![]() |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|