Boss Mustang stocker

Bill Diehl · 06-26-2016, 08:29 AM

Now I have to do the drivers side and then get it on the jig to put it all together.

you can see how the 25.5C "frame" will tie it all together

Dave Noll · 09-15-2016, 06:13 PM

Any updates for us FFFord nuts Bill ?

Bill Diehl · 09-16-2016, 02:26 AM

Quote:

Originally Posted by Dave Noll

Any updates for us FFFord nuts Bill ?

not much, I have been to busy at work to work on the car

Bill Diehl · 10-19-2016, 08:54 AM

As I posed earlier in the thread I was not happy with the "fit" of the new cowl to the old firewall, so......lets do it again

Also the "table" or "jig" whatever you want to call it will be donated to the next guy that is interested, just come by and pick it up when I am finished

Bill Diehl · 10-25-2016, 07:54 PM

Fitting the inner fender panels to the new firewall, this was a whole lot easier than I expected.....much better than the last time, they were not even close, these fit like a glove.

Dwight Southerland · 10-25-2016, 10:33 PM

Nice, thorough work.

Bill Diehl · 11-25-2016, 10:06 AM

Thanks ...............Torque boxes, getting a good clean fit is harder than I expected

06-26-2016, 08:29 AM	#1
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker Now I have to do the drivers side and then get it on the jig to put it all together. you can see how the 25.5C "frame" will tie it all together __________________ __________________ Bill Diehl B200 C/D STK

09-15-2016, 06:13 PM	#2
Dave Noll Senior Member Join Date: Nov 2007 Location: Div. 6, Eastern, WA Posts: 712 Likes: 2,716 Liked 240 Times in 112 Posts	Re: Boss Mustang stocker Any updates for us FFFord nuts Bill ? __________________ Dave Noll, EF/S ,?/SA 6526

10-19-2016, 08:54 AM	#4
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker As I posed earlier in the thread I was not happy with the "fit" of the new cowl to the old firewall, so......lets do it again Also the "table" or "jig" whatever you want to call it will be donated to the next guy that is interested, just come by and pick it up when I am finished __________________ __________________ Bill Diehl B200 C/D STK

10-25-2016, 07:54 PM	#5
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker Fitting the inner fender panels to the new firewall, this was a whole lot easier than I expected.....much better than the last time, they were not even close, these fit like a glove. __________________ __________________ Bill Diehl B200 C/D STK

10-25-2016, 10:33 PM	#6
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 2,003 Likes: 64 Liked 784 Times in 196 Posts	Re: Boss Mustang stocker Nice, thorough work. __________________

11-25-2016, 10:06 AM	#7
Bill Diehl Member Join Date: Dec 2013 Posts: 311 Likes: 2 Liked 9 Times in 8 Posts	Re: Boss Mustang stocker Thanks ...............Torque boxes, getting a good clean fit is harder than I expected __________________ __________________ Bill Diehl B200 C/D STK Last edited by Bill Diehl; 11-25-2016 at 12:35 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode