|
|
![]() |
#1 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
So while the trans is out we had a look inside, gave it a reseal, cleaned it up and fresh oil.
![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Stickers... what stickers?
![]()
__________________
Todd Greene |
![]() |
![]() |
Liked |
![]() |
#3 |
Member
Join Date: Dec 2015
Location: TUCSON , AZ.
Posts: 168
Likes: 10
Liked 0 Times in 0 Posts
|
![]()
Looks like a real fun deal , looks like you have a great partner in crime. Good luck with all the changes.
__________________
Old Nick in Tucson! Hahaha |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Were having super fun!
__________________
Todd Greene |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Two issues in this photo... 1 the heat that's been in that flywheel and 2, that dowel will not properly locate the bellhousing.
![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Dec 2001
Location: Arkansas - In the middle of everything.
Posts: 2,000
Likes: 64
Liked 777 Times in 193 Posts
|
![]()
Congrats! That's the best reason to do it.
__________________
![]() |
![]() |
![]() |
Liked |
![]() |
#7 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
Our current situation is replacing the switch panel and all under dash wiring. More than likely this will not be the final resting place for the electronics panel but since it's here, and we want to get some testing in, here it will stay for now. End of the year when the engine gets freshened we'll put a Racepak in so the panel location will change then.
![]() ![]() ![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Aug 2013
Posts: 1,763
Likes: 1,197
Liked 1,955 Times in 492 Posts
|
![]()
So for today's fun, we pulled the block plate off so we had more dowel to work with and NOPE... not even close.
![]() ![]()
__________________
Todd Greene |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|