Car will not start.

[Dragsinger]

Thoughts;

Do you have access to live data with an onboard display or controller?

If so, check that all sensors are showing a normal value.

*Ambient air temp correct?
*Coolant temp correct?
*TPS correct?
*MAP correct? [connect a vacuum source to the MAP, it should show a voltage range with different vacuum levels applied]
*Fuel pressure correct?
*Are the injectors pulsing? [check with noid light tester or "listen" for the injector ticking with a listening device]

[TinSoldier 3215]

Here's a update. It has no spark or fuel.

[Dragsinger]

With that information, check for power and ground to the controller

[TinSoldier 3215]

We are checking the ignition panel now.

[buzzinhalfdozen]

Originally Posted by jonesracing

Here's a update. It has no spark or fuel.

Your issue appears to be the big stuff is not receiving engine position information (no crank sensor input) not familiar with their stuff but I'd think they would have an LED somewhere on the box that blinks each time it sees a crank sensor pulse. No pulse equals no spark or injector activity.