Mechanical stops

rob7181 · 05-23-2018, 07:41 PM

Jeff,

I use the 4500 style ET genie, before that I made a stop out of an aluminum spacer. I may still have a 4150 style stop that I use to use on smaller motors.

Rob

Hacksaw · 05-23-2018, 08:07 PM

If it were me, I would just make the carb adjustable on the secondaries or a positive stop under the pedal. For .2 secs on your et slip you may need that in the summer heat. Save your money.

Tom Goldman · 06-04-2018, 09:47 AM

Hacksaw's right for that little amount I'd dead bolt under the pedal or linkage ,or use weight .
Way back when I ran Super Street , I dead stopped for the main amount and adjusted up or down for the last .10th or so with weight ,

05-23-2018, 07:41 PM	#1
rob7181 Junior Member Join Date: Mar 2011 Location: Maryland Posts: 42 Likes: 0 Liked 1 Time in 1 Post	Re: Mechanical stops Jeff, I use the 4500 style ET genie, before that I made a stop out of an aluminum spacer. I may still have a 4150 style stop that I use to use on smaller motors. Rob

05-23-2018, 08:07 PM	#2
Hacksaw Senior Member Join Date: Sep 2016 Posts: 884 Likes: 209 Liked 312 Times in 175 Posts	Re: Mechanical stops If it were me, I would just make the carb adjustable on the secondaries or a positive stop under the pedal. For .2 secs on your et slip you may need that in the summer heat. Save your money.

06-04-2018, 09:47 AM	#3
Tom Goldman VIP Member Join Date: Jan 2003 Location: Allentown,PA Posts: 2,478 Likes: 894 Liked 885 Times in 238 Posts	Re: Mechanical stops Hacksaw's right for that little amount I'd dead bolt under the pedal or linkage ,or use weight . Way back when I ran Super Street , I dead stopped for the main amount and adjusted up or down for the last .10th or so with weight , __________________ Tom Goldman 1500 SG , 1506 STK

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode