Et Genie 10.90

Lenny5160 · 01-31-2020, 10:34 AM

You'll figure it out the same way you figure out a throttle stop ratio. Set the Genie up according to a guess, see what the car runs. Make a somewhat large change to the Genie, and see how much that changed the ET. You should then be able to get pretty close on the third pass.

Some friends have run static plates to keep their cars above 10.00 when bracket racing, and it seems like every change of 0.100" to the bore size would change the ET about a tenth.

01-31-2020, 10:34 AM	#7
Lenny5160 Senior Member Join Date: Nov 2015 Location: Inver Grove Heights, MN Posts: 898 Likes: 604 Liked 431 Times in 224 Posts	Re: Et Genie 10.90 You'll figure it out the same way you figure out a throttle stop ratio. Set the Genie up according to a guess, see what the car runs. Make a somewhat large change to the Genie, and see how much that changed the ET. You should then be able to get pretty close on the third pass. Some friends have run static plates to keep their cars above 10.00 when bracket racing, and it seems like every change of 0.100" to the bore size would change the ET about a tenth. __________________ S/ST 51 S/C 53

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode