|
|
![]() |
#1 |
Junior Member
Join Date: Nov 2018
Posts: 10
Likes: 0
Liked 17 Times in 3 Posts
|
![]()
We might need to start a new thread regarding HPtuners. It might be more fitting on Classracer since dial in racing is going to have a pretty different tune rather than a fast street car tune, which seems to be moderately common on the repository.
My question is, how "simple" can I make a car for the strip only? Lock timing, RPM only shifts, no spark advance or retard, No IAT adjustments, etc.. |
![]() |
![]() |
Liked |
![]() |
#2 |
Member
Join Date: Feb 2018
Location: Jersey
Posts: 213
Likes: 195
Liked 867 Times in 165 Posts
|
![]()
Basically what I did was find out what was varying run to run and locking it out. The timing is now locked because it did some wacky stuff from run to run before. I also disabled the knock sensor because even though it wasn’t pinging, it would randomly take timing out to try and mess with the air fuel ratio. I put it in open loop so it didn’t try and tune itself going down the track, and the shifts are set by rpm.
|
![]() |
![]() |
Liked |
![]() |
Thread Tools | |
Display Modes | |
|
|