|
03-23-2021, 07:47 AM | #1 |
Member
Join Date: Dec 2001
Location: Ontario Canada
Posts: 365
Likes: 119
Liked 7 Times in 5 Posts
|
G body suspension
Building a Malibu for stock . what bolt on rear suspension mods is everybody using. Any help appreciated . Mike
|
03-23-2021, 10:22 AM | #2 |
Member
Join Date: Jul 2007
Posts: 172
Likes: 35
Liked 28 Times in 9 Posts
|
Re: G body suspension
I would start with a real good set of adjustable rear shocks and initially tighten the right one more than the left ( you will have to test to determine what settings work best ) . The rear sway bar is critical and will need to be adjustable as well ; the best I found was HRpartsNstuff (330) 947-2433 . Good luck with your project .
|
03-23-2021, 05:28 PM | #3 | |
Member
Join Date: Aug 2005
Location: Covington, LA
Posts: 99
Likes: 0
Liked 11 Times in 4 Posts
|
Re: G body suspension
Quote:
A rear sway bar is the best investment you will make. I bolted on the Xtreme Anti-roll Bar from BMR Suspension and it removed all body twist from my car. However, it does add about 25 pounds.
__________________
Owen S. Birkett Stock/Super Stock 4106 |
|
Liked |
03-25-2021, 09:08 AM | #4 |
Member
Join Date: Jul 2015
Posts: 358
Likes: 63
Liked 238 Times in 93 Posts
|
Re: G body suspension
They are pretty simple and inexpensive. Basically adjustable upper trailing arms to adjust pinion angle. Box in the lowers for strength. Solid or poly urethane bushings. Adjustable shocks,and anti roll bar or airbag in pass side coil spring to control rollover. Some good products and info over at maliburacing com
|
03-26-2021, 12:30 PM | #5 |
VIP Member
Join Date: Jul 2002
Location: Michigan
Posts: 1,222
Likes: 134
Liked 498 Times in 104 Posts
|
Re: G body suspension
Like Brian F. said above, the HR Parts 'n' Stuff anti-roll bar is great, and it's made from hollow chrome moly tubing and isn't very heavy. There are alot of nice upper and lower control arms out there from alot of companies.
__________________
Jim Kaekel 3836 STK |
03-26-2021, 08:02 PM | #6 |
Member
Join Date: Jan 2002
Location: Sedalia, Mo
Posts: 428
Likes: 294
Liked 290 Times in 58 Posts
|
Re: G body suspension
Some of the aftermarket lower control arms will change the wheelbase a little. Be sure to check.
__________________
Bob Shaw V/SA 515 |
03-27-2021, 01:09 AM | #7 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,635
Likes: 2,747
Liked 4,805 Times in 1,828 Posts
|
Re: G body suspension
Those are the ones I use ;-)
__________________
Real life never quite adds up.... Jay Farrar |
03-27-2021, 09:22 AM | #8 |
Senior Member
Join Date: Feb 2006
Posts: 634
Likes: 121
Liked 135 Times in 49 Posts
|
Re: G body suspension
Stock boxed arms with bushings and comp engineering shocks with an anti roll bar are good to 10 s. Some use the HR arms instead of boxing and bushing the stockers. The HR Anti roll bar is the top of the food chain but lots of Buick guys use the old ATR bar. This is a stock mount style and works very good. Stock GN springs go low 9s.
http://www.aggressiveauto.com/proddetail.asp?prod=SU00
__________________
The more people I meet the more I like my dog Kevin |
Thread Tools | |
Display Modes | |
|
|