|
|
|
|
10-16-2021, 04:54 PM
|
#1 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
From here on out, the project was just working through one small project after another in which there were many.
First up was mounting the Racetech seat.   Mockup block removed and the engine out of my Malibu set in place.   Hood clearance issue...will get back to that later.  Brake pedal mount.   Removable transmission crossmember and mount.     Front driveshaft loop. 
|
|
|
| Liked |
|
10-16-2021, 04:57 PM
|
#2 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
Steering column.
 Steering linkage.   Chute handle  Throttle pedal recycled from the Malibu  Battery mount 
|
|
|
|
|
10-16-2021, 04:59 PM
|
#3 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
Now comes time for the tin work.
          
|
|
|
|
| Liked |
|
10-16-2021, 05:02 PM
|
#4 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
Firewall up next. Not totally thrilled with how this came out, but...
  
|
|
|
|
| Liked |
|
10-16-2021, 05:05 PM
|
#5 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
Chromoly driveshaft enclosure.
 Line lock and remote master cylinder reservoir.  Electronics panels  Cut back and cap off the rockers.  Chute anchor. 
|
|
|
|
| Liked |
|
10-16-2021, 05:08 PM
|
#6 |
|
Member
Join Date: Feb 2002
Posts: 328
Likes: 64
Liked 345 Times in 149 Posts
|
Re: 8.50 index build
Shock tower rust hole patch.
 Preparing the stock cowl panel to be reinstalled.    Closing off the cowl windshield base to the dash bar. 
|
|
|
|
| Liked |
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
