Fel Pro 97060-3 SBC Intake Gasket - Page 2

Mike Pearson · 03-28-2025, 09:35 AM

I use the gaskets from Heads Up. They have them available in regular thickness and double thickness. Give them a call. I usually buy 6 sets at time. they have the oval port configuration.

Greg West · 03-28-2025, 12:06 PM

You could send a sample or a drawing to Flatout Gaskets. They can make what you need.

SSDiv6 · 03-28-2025, 02:41 PM

Quote:

Originally Posted by Greg West

Yes, I believe I made those gaskers for Rick Watters. I retired from Fel-Pro almost ten years ago now. Those individual parts were never put into a Intake Gasket Set. We only sold them as a bulk part to Rick. Best bet would be to try to contact Rick.

Rick is back in Arizona.
I believe he is working at Outlaw Race Engines in Phoenix, Arizona.

03-28-2025, 09:35 AM	#11
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,442 Likes: 613 Liked 1,915 Times in 574 Posts	Re: Fel Pro 97060-3 SBC Intake Gasket I use the gaskets from Heads Up. They have them available in regular thickness and double thickness. Give them a call. I usually buy 6 sets at time. they have the oval port configuration. __________________ Mike Pearson 2485 SS

03-28-2025, 12:06 PM	#12
Greg West Junior Member Join Date: Jul 2016 Posts: 63 Likes: 24 Liked 52 Times in 22 Posts	Re: Fel Pro 97060-3 SBC Intake Gasket You could send a sample or a drawing to Flatout Gaskets. They can make what you need.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode