Question for the old guys

[Bob Bender]

Six Times

[Larry Hill]

Not sure maybe 8 to 10 times. Indy a few times and always passed, never been tossed.

[JP1738]

I'm by no means an old timer, but to add perspective, I'm at 1/2 times. They asked to look at my car at SGMP to look under the valve covers, check casting numbers, and the inspected my quadrajet. I wouldn't consider that a tear down, but it was the most in depth check of any kind I have experienced so far in my 1.5 years of class racing.

[GTX JOHN]

Quite a few, including 3 times in a little over a month
around 2010 in the Aspen Wagon.

[Dan Bennett]

Once, at Indy in Pro Stock. Having Jenkins as our point man eased the urge to have to change underwear.

Pretty notable, because including the usual things, JC Collins spent probably a half hour with a jeweler's loupe looking at our mid plate. Made no sense until the news about the Glidden boys came out a few days later.

[Jim Caughlin]

If it comes to a bet, I would vote for Cal Method. I'm sure he quite counting decades ago.

[mikeloge]

i hold the record for most tear downs hands down. i dont know if they keep records but i have to hold that record i pissed somebody off i guess about 50 plus times plus record tear downs i own this one!!!!!!!!!!

[Jack McCarthy]

Ok loge is the leader and Cal is awaiting response

And in full disclosure I?ve been tossed twice 5# valve spring pressure and was last my guy ever tossed on duration cam checked 5 times till that lobe 😳😳 both times by my good friend Travis Miller

[Cglrcng]

No record here. Only 1 voluntary mock teardown and a casting numbers ck at Englishtown, NJ in 1995 after winning class all alone and running just a hundreth under the 17.45 sea level index in GF/SA (they offered it and cc'd the head, as it had never been off since the assembly line build, car at that time
only had header and a converter).
They did find that the intake casting # was a mid-level year factory chg in October of 84 and car was a 3rd week Dec. 84 build, but Dodge never updated their (NHRA's), guide specs to include that intake for the 84 model. It took tech 22 mins. on the phone and it was verified directly from the car build sheet data.

Then they officially added to the guide officially in Feb 1996 as an accepted intake for the 99hp 135 TBI car/engine combo. Same date/ time they corrected and reduced my hp from 110 to 99 by review request letter as the only data they ever had on the single point injection TBI were all my passes.

I sat out 2.5 decades before making changes, but am fully prepared and have always carried gaskets and ck tools necessary. It will happen, and it will pass.

Sometimes positive things can and do happen. Begging someone to make a record attempt should not be necessary at the right event.

[Cglrcng]

My bets are Loge, Method and maybe Yac.

3 times in 1 month John, sounds excessive my brother.