|
|
|
|
07-18-2008, 11:47 AM
|
#1 |
|
Member
Join Date: Jun 2008
Location: League City, Texas
Posts: 243
Likes: 0
Liked 0 Times in 0 Posts
|
Re: thead sealer for aluminum heads
I would double nut them and let them bottom out to about 10 ft lbs. Not over tight, but tight enough to where they won't come out when you take the nut off. Antiseize on the spark plug and silicone on the heads bolts/studs that go in the block.
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
