|
11-02-2022, 02:17 PM | #11 |
Senior Member
Join Date: Sep 2009
Posts: 840
Likes: 931
Liked 2,328 Times in 458 Posts
|
Re: Billet cams and lifter supply
Jim, Why didn't I think about that. So all you guys that have an older than 85 car and need a set of lifters that are going to last. Just put your cars in a car crusher. Maybe Jim will post his phone number and start giving away his money if you can't afford a Super Stocker.
Jeff V don't get me wrong I like the new cars in Stock but most are closer to comp motor's than old school Stockers. With your car you don't have to worry about them. James Perrone I'd guess knowing your engine builder you already have a set of Tool Steel lifters in your car. What if you break and need to fix it? Sam I'm not sure how many sets of roller lifters there are but with almost all race engine using them. I'm sure the supply has to be greater than flat tappet lifters. I used Schubecks for years with no problems. But we all know someone that has lost a motor with them. I offered my old set to a friend but his engine builder wouldn't use them. Rich I'm sure we all agree with you. We can only hope for change in our Country. I sold my business at the beginning of the year because I'm done counting on employee's. But it still doesn't fix the problem. |
11-02-2022, 02:53 PM | #12 |
Member
Join Date: Feb 2017
Posts: 343
Likes: 449
Liked 285 Times in 106 Posts
|
Re: Billet cams and lifter supply
Ahhh, bidenflation and universal economic incompetence. Or is it intentional. Love him or hate him, TRUMP had USA revving on all cylinders. And even peace breaking out in the Middle East! Tuesday is Election Day. Are you 'satisfied' with the current condition or maybe start to get back to where we SHOULD BE?!
|
11-02-2022, 02:59 PM | #13 | |
VIP Member
Join Date: Mar 2007
Posts: 2,354
Likes: 558
Liked 1,702 Times in 520 Posts
|
Re: Billet cams and lifter supply
Quote:
I also work in the commercial construction world. Same here we never missed a day of work during covid. During that time all of the back stock was used up. Now we are having real supply chain issues. On the project I am working on now we had to wait a full year for the roof membrane. Now waiting for AC units that were ordered 8 months ago are still several months out for manufacture and delivery. The main electrical gear from Square D is over a year lead time. Waiting for an emergency generator from Cummins/Onan that has been on order for over a year and is 3 months overdue. Thats just a short list. concrete shortages. had a hard time getting 12 inch CMU. Insulated hurricane glass is a 6 month lead time. Then we had the hurricane about a month ago and the power company has paused all new construction projects while they ae in storm reconstruction mode . All of this is affecting our completion dates. I can only imagine what these small high performance manufacturers are going through. I need to freshen my engine in the next several months to be ready for next year. Not sure if rings, valves and springs will be available. I guess i will find out here real soon. unfortunatly i dont see it improving any time soon.
__________________
Mike Pearson 2485 SS |
|
11-02-2022, 04:17 PM | #14 |
Member
Join Date: Feb 2018
Location: Jersey
Posts: 189
Likes: 175
Liked 784 Times in 152 Posts
|
Re: Billet cams and lifter supply
I guess the only solution I can think of to avoid this issue is to use a camshaft where you don't need a special set of lifters. I understand the benefits of a billet camshaft, along with the different pricy lifter options, but that's not really in my price range, so for now I make due with what I can afford. I actually found a small, family owned company out in California that sells flat tappet lifters made in the USA by Johnson Lifters. I've had very good luck with them even with my relatively square 6 cylinder camshaft profile, and plan to use them on my small block build this winter. Yes, billet cams are great, only if you can afford it along with the special lifters, even the cheap ones. It can be quite discouraging to even want to tackle building a stocker for a popular class with the knowledge that some of your competitors have cylinder heads on their engines that cost them about the same if not more than I am spending to build an entire engine. Though limited, there are combos in the guide you cannot physically get roller lifters for, so how would it be fair to allow roller lifters in all stockers? It's interesting to see how the same people that say "if you don't like that your combo doesn't accept aftermarket parts, choose a different combo" don't like being told "if you want roller lifters, either choose a roller lifter combination, or move to super stock." There's a lot of similarities with this as there are in allowing aftermarket heads for combos you "can't find head castings for anymore." If this does materialize, I would be more inclined to roll with it as long as there is an added hp if you decide to use roller lifters, but that could get a bit tedious to police. For now, I guess I'll see what I can do with a bit of "yesterday's technology" and hopefully be somewhat competitive. Plus there's a great deal of fun to be had in "scraping together" a stocker.
__________________
1189 F/SA Defunzalo Racing Enterprises Last edited by Doug Hoven; 11-02-2022 at 04:36 PM. |
11-02-2022, 06:11 PM | #15 |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 370
Likes: 0
Liked 426 Times in 134 Posts
|
Re: Billet cams and lifter supply
There are some options if one does not want or can not afford to go the Tool steel/DCL lifter route.
Yes PPPC was saying lifter lead times were very long due to them having their machine down and they could not get it fixed. They could recondition lifters however . I believe it is now repaired and running. I did get my set after 6 months wait . Short of a Tool steel cam core, using P55 core and uncoated tool steel lifters will allow you to run 200-210 on the seat , 390 -400 over the nose. Only issue is you only get maybe 80-90 runs with it. P 55 Cams are pretty cheap. You can get PPPC to polish the lifter face for 140.00 a set and a 1 week turnaround time. Changing cams is a 3-4 hour job with a Comp 3 piece timing cover. Certainly cost effect compared to TS/DCL 3 -4 K cost. I just ordered a Total Seal ring set and spacers, Keith indicated 8 weeks. Flat Tappet / Roller Cams in Stock debate, if they do every make this change, please NHRA allow either or and 12 months advance notification of the change. Steve Teeter Stk/SS 620. |
11-02-2022, 07:15 PM | #16 | |
Member
Join Date: Mar 2006
Location: California
Posts: 151
Likes: 2
Liked 105 Times in 33 Posts
|
Re: Billet cams and lifter supply
Quote:
__________________
John Ancona 705 STK / SS |
|
11-02-2022, 07:42 PM | #17 |
Member
Join Date: Feb 2006
Location: sooner state
Posts: 105
Likes: 2
Liked 64 Times in 22 Posts
|
Re: Billet cams and lifter supply
Was told yesterday NO P55 cores and are not going to make anymore either,that’s at Bullet and they have/had a very good core inventory awhile back......
|
11-02-2022, 11:45 PM | #18 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,998
Likes: 693
Liked 1,469 Times in 549 Posts
|
Re: Billet cams and lifter supply
It is not only the automotive industry that is having supply chain issues.
I work for a supplier of military equipment and hardware for the Department of Defense. We have a contract and are the sole supplier of all the fasteners that are used by the military on aircraft, ground vehicles and weapon systems for overhaul, repair and maintenance and have over 60K of SKU's we need to fulfill. We are talking of AN, MS, NAS fasteners such as bolts, screws, nuts, washers, rivets, etc... Due to the supply chain issues for materials and many manufacturers closing, we have lead times on some items of 2 and 3 years! Also, the prices of many of the items we quoted , have increased in price as much as 60% from the original quote. Yes, there is a supply chain issue in many ways for racing parts and also with the mergers, many companies have quit manufacturing many products. |
Liked |
11-03-2022, 05:19 AM | #19 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,444
Likes: 1,745
Liked 10,051 Times in 2,085 Posts
|
Re: Billet cams and lifter supply
A simple but costly solution: Made In The USA
|
11-03-2022, 07:42 AM | #20 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,330
Likes: 3,337
Liked 7,198 Times in 1,610 Posts
|
Re: Billet cams and lifter supply
How about this for a solution, get off your inflated egos and build slow, cheap combos that can be put together with E-Bay and salvage yard parts! In the end, we're all running for the same pathetic purse.
__________________
Billy Nees 1188 STK, SS I'm OK..........it's everybody else. |
Thread Tools | |
Display Modes | |
|
|