|
07-07-2014, 09:32 AM | #1 |
Junior Member
Join Date: Jul 2014
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
Inconsistency
Is it possible for a converter to cause an issue where my car will make 3 or 4 passes within .04 of each other then out of nowhere make a pass that is .2 slow. On the pass where is slows down it loses ET everywhere starting with the 60'. Everything has been changed on the car trying to solve this issue, wiring, MSD, coil, fuel system, etc... I am of the assumption that if something was wrong in the converter it would continue to slow down, where as once I load up after making this slow pass, the next time to the track the car is right back to making good passes.
3000 lbs car 540" BBC Ladder Bar Rear Suspension Powerglide I installed a data recorder to track engine RPMs this past weekend and on the two passes where the car fell off, the RPMs are very shaky from about .07 into the run. I will try to post a picture of the graph later. |
07-07-2014, 07:32 PM | #2 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,969
Likes: 89
Liked 543 Times in 263 Posts
|
Re: Inconsistency
post up all the time slips in order from the day in question.
That said, moving .04 in 3 or 4 passes is a problem no mind 2 tenths. Consistency starts and end with the one wearing the brain bucket. Are you doing everything exactly the same from the moment you buckle your harness to the moment you cross the stripe? Last edited by 1320racer; 07-07-2014 at 07:35 PM. |
07-08-2014, 05:45 PM | #3 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
Re: Inconsistency
Too rich makes it too sensitive to temp and Baro changes.
__________________
Ed Wright 4156 SS/JA |
07-08-2014, 07:25 PM | #4 |
Junior Member
Join Date: Jul 2014
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Inconsistency
I pay extra attention to my routine for consistency, especially since these issues have come up.
I have the RPM graphs saved as pdfs but am not sure how to post them. I do not think it is jetting just for the fact that no big change in weather has to happen for the car to make a slow run. No matter what the weather does the 4th or 5th run will be .2 slow and if we make any additional passes after the slow run they are slow as well. |
07-08-2014, 09:35 PM | #5 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,969
Likes: 89
Liked 543 Times in 263 Posts
|
Re: Inconsistency
again, post the time slips in order from one day.
|
07-11-2014, 01:48 PM | #6 |
Senior Member
Join Date: May 2004
Location: Brookfield, CT
Posts: 708
Likes: 13
Liked 322 Times in 68 Posts
|
Re: Inconsistency
Had a car do that once, had one broken roller in converter sprag.
__________________
Lee Valentine 1661 STK |
07-16-2014, 12:14 AM | #7 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 699
Likes: 2,445
Liked 224 Times in 106 Posts
|
Re: Inconsistency
Targus, In the submit reply window, top row, there is a paper clip next to a smiley. Right click that & a window opens with a button to browse your computer for the files you want to upload & in the lower right of that frame an upload button. That said, I have never been able to upload a .pdf, only a .jpg or .bmp. Can you save the file differently ?
1320, how bout we help with his upload issue 1ST.
__________________
Dave Noll, E/FS ,?/SA 6526 |
07-16-2014, 02:46 PM | #8 |
Junior Member
Join Date: Jul 2014
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Inconsistency
Attached are RPM graphs with the red line showing a "good" pass and the black line showing a "bad" pass where is slows .2
|
07-16-2014, 10:22 PM | #9 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 699
Likes: 2,445
Liked 224 Times in 106 Posts
|
Re: Inconsistency
I haven't had the privilege of reading many of these graph's but with the black line rough, does the engine have an intermittent miss ?
__________________
Dave Noll, E/FS ,?/SA 6526 |
07-17-2014, 02:34 PM | #10 |
Junior Member
Join Date: Jul 2014
Posts: 8
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Inconsistency
There is not a noticeable miss. With the lower stall of the converter you can feel that it is on a lazy pass. The up and down movement in the black line equals about 100 RPM.
|
Thread Tools | |
Display Modes | |
|
|