|
![]() |
#11 |
VIP Member
|
![]()
I`d have to agree with Jim on this as well. I`ve done back to back runs with steel wheels and Centerlines with the same size tire and saw no noticeable improvement on a V/SA Buick Skyhawk or Skylark.
__________________
Lane Weber It`s Not What You Drive That Wins....It`s How You Drive It |
![]() |
![]() |
![]() |
#12 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 389 Times in 168 Posts
|
![]()
I went from four Stock steel wheels to four light aluminum wheels on my '56 Chevy Jr Stocker, and was disappointed to find zero change in ET or MPH.
Same results from going to an aluminum spool, lightened ring gear & drilled axles on my C/MP '69 Camaro a few years later. I have wasted a lot (to me) of money testing "trick" parts over the years.
__________________
Ed Wright 4156 SS/JA Last edited by Ed Wright; 08-14-2018 at 07:22 PM. |
![]() |
![]() |
![]() |
#13 |
VIP Member
Join Date: Apr 2002
Location: Coarsegold, CA
Posts: 1,017
Likes: 57
Liked 321 Times in 101 Posts
|
![]()
The further away from the centerline of rotation the greater benefit of rotating weight reduction..
Remove 1 pound of rotating weight from the OD of the flywheel vs. a 1 pound reduction from gun drilled axles..... It's called moment of inertia. Just sayin'
__________________
Bob Mulry 7516 STK A & M Motorsports |
![]() |
![]() |
![]() |
#14 |
Member
Join Date: Mar 2002
Location: Canada
Posts: 145
Likes: 282
Liked 157 Times in 44 Posts
|
![]()
I maybe shouldn't wade in here because I really don't have a dog in the fight, but on the other hand, perhaps this info can help someone:
Decades ago, when I worked for the late great Super Stock & Drag Illustrated, I penned a tech article on the effects of reducing wheel weight. Sheldon Gecker (most here know of Sheldon) had run some well documented A-B-A tests of wheel weight on his Super Gas car. He went as far as having some heavy wheels made (same configuration as his light wheels), ran them and then switched to lighter wheels and then back to heavy wheels. The car definitely picked up with the light wheels. Keep in mind this was a relatively light, relatively high horsepower car. If I recall correctly, the goal was to improve the vehicle reaction and short times. Obviously for Sheldon, it worked. On a similar note, shortly after that I was personally involved in another magazine driveshaft test on a very well sorted, consistent mid to high class NHRA Stock Eliminator car. I won't mention the racer's name, but he is smart, seasoned and meticulous. A stock DOM shaft was swapped for a lightweight (illegal of course...L-O-L) aluminum shaft and then back to the DOM shaft (typical A-B-A test). Conditions were monitored closely and it was all accomplished in a short period of time. The car definitely picked up with the light shaft. My take by looking at the comments here is that the power and weight of the car can make a considerable difference. As a result, your results may vary...L-O-L |
![]() |
![]() |
![]() |
#15 | |
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 570
Likes: 116
Liked 280 Times in 139 Posts
|
![]() Quote:
Last edited by gsa612; 08-14-2018 at 10:22 PM. |
|
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jun 2007
Posts: 761
Likes: 387
Liked 266 Times in 86 Posts
|
![]()
My old friend Charlie Ford told me over 30 years ago that "If everything I bought that was suppose to pick me up a Tenth or so was true.....I'd be going zero right now!"
Ain't it the truth......lol RJ |
![]() |
![]() |
![]() |
#17 | |
Member
Join Date: Mar 2002
Location: Canada
Posts: 145
Likes: 282
Liked 157 Times in 44 Posts
|
![]() Quote:
![]() Last edited by Wayne Scraba; 08-14-2018 at 11:01 PM. |
|
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: Feb 2010
Posts: 505
Likes: 7
Liked 353 Times in 83 Posts
|
![]()
[QUOTE=RJ Sledge;569877]My old friend Charlie Ford told me over 30 years ago that "If everything I bought that was suppose to pick me up a Tenth or so was true.....I'd be going zero right now!"
Awesome quote... |
![]() |
![]() |
![]() |
#19 | |
Senior Member
Join Date: Mar 2002
Location: Woodburn, Or
Posts: 637
Likes: 70
Liked 696 Times in 209 Posts
|
![]() Quote:
I would suggest that some of the tests discussed above were in cars that were overweight. If that's the case, go for it but if you are having to add lead back in to compensate, not so much to be gained. As I said previously, I would still buy these parts if I was building a new car, just that I realize that there is very minimal value in them. I'll be at Seattle this weekend, we can continue the debate there. Jim Caughlin SS 6029 |
|
![]() |
![]() |
![]() |
#20 |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,576
Likes: 3,299
Liked 685 Times in 293 Posts
|
![]()
I guess we have all bought a lot of stuff that was supposed to be good for a tenth and were disappointed.
However a long time ago Paul Forte told us one of his 904 transmissions would be a tenth quicker than the 727 we were running and he was right. I am guessing about half of that was less static weight and the other half was reduced rotating weight. |
![]() |
![]() |
![]() |
|
|