Dumbo The Flying Elephant - Page 33

jmcarter · 02-23-2020, 09:24 AM

Would be great to see you and Patsy at the Baby Gators if you can make it; it was an awesome event last year.

Larry Hill · 02-24-2020, 08:44 AM

Maybe the Atlanta pts meet. The engine is at a stopping point, it holds water and we, Cooter has a tune in it. We have yet to get A to B, trans ratios (Joel has helped), converter flash, shift points, starting RPM, and shock settings, just to name a few.

Condensation in the valve covers seems like a lot to me, but zero water in the pan. The engine makes good power a little north 7000 RPM. After racing a 440 all these years that seems like a lot of RPM's. It sure sounds good on the dyno.

My job at the dyno was easy all I had to do was stay out of the way. Sid operated, Cooter did the tuning, and Shawn did most everything else except supervise. Supervision was left to the master, Mr. Jeff.

Two days of fun at the dyno, I just love it!

Larry Hill · 02-26-2020, 08:59 AM

I will be fine tuning my push-rod instillation tool today. Failure was caused by push-rods being to large, rods are much bigger. I have to figure something out on the exhaust side, its real busy up top. You cant see anything without a scope.

Larry Hill · 02-27-2020, 08:26 AM

What a day, nothing worked that would repeat with the exception of gravity. The bright spot is; its a solid roller so I will not have to pull the head to install a solid lifter for checking valve lift.

I'll try something different today.

Larry Hill · 03-05-2020, 09:34 AM

Change filters, add oil, install engine and trans. One step closer.

Larry Hill · 03-11-2020, 08:39 AM

I finally got the above post done.
I had some good reasons why it took so long. A lingering cold, and a Grandpa. Its fun being at the granddaughters Basketball, soccer, and volleyball games. I know people outside the states of Kentucky and Indiana do not Capitalize the word Basketball. I'm not sure what the penalty is in Indiana, but here in Kentucky it's not a felony but darn close.

Larry Hill · 03-14-2020, 08:11 AM

I have drive train installed. I have different shaped bolts for engine mounts, and transmission mounts. Both had same size bolts, now head size and flange is different making it easier to assemble. Best thing about this installation is never having having to use the ill fitting CSR shield. I want to say more about CSR but I won't, you get the picture.

340Cuda · 03-14-2020, 10:31 AM

Larry,

I apologize if I missed this earlier in this thread, but what did you use that fit better than the CSR.

I am not a big fan of CSR either.

Thanks,
Bill

Larry Hill · 03-14-2020, 10:51 AM

TCI shields and a BFH. It ain't easy or fun adjusting stuff to make it fit. I don't think the knot on my left thumb will ever go away, missed swing of a four lbs hammer.

MR DERBY CITY · 03-14-2020, 11:56 AM

Larry, its a shame that DUMBO is all dressed up , with no place to go.... I followed your build very closely....

02-23-2020, 09:24 AM	#321
jmcarter VIP Member Join Date: Dec 2008 Location: Richmond Hill GA (and Port Ludlow WA) Posts: 4,274 Likes: 2,312 Liked 3,100 Times in 955 Posts	Re: Dumbo The Flying Elephant Would be great to see you and Patsy at the Baby Gators if you can make it; it was an awesome event last year. __________________ Jim Carter 2340 Super Stock 2340 SST/2340 Stock Set another place at the table

02-24-2020, 08:44 AM	#322
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant Maybe the Atlanta pts meet. The engine is at a stopping point, it holds water and we, Cooter has a tune in it. We have yet to get A to B, trans ratios (Joel has helped), converter flash, shift points, starting RPM, and shock settings, just to name a few. Condensation in the valve covers seems like a lot to me, but zero water in the pan. The engine makes good power a little north 7000 RPM. After racing a 440 all these years that seems like a lot of RPM's. It sure sounds good on the dyno. My job at the dyno was easy all I had to do was stay out of the way. Sid operated, Cooter did the tuning, and Shawn did most everything else except supervise. Supervision was left to the master, Mr. Jeff. Two days of fun at the dyno, I just love it! __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

02-26-2020, 08:59 AM	#323
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant I will be fine tuning my push-rod instillation tool today. Failure was caused by push-rods being to large, rods are much bigger. I have to figure something out on the exhaust side, its real busy up top. You cant see anything without a scope. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

02-27-2020, 08:26 AM	#324
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant What a day, nothing worked that would repeat with the exception of gravity. The bright spot is; its a solid roller so I will not have to pull the head to install a solid lifter for checking valve lift. I'll try something different today. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-05-2020, 09:34 AM	#325
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant Change filters, add oil, install engine and trans. One step closer. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-11-2020, 08:39 AM	#326
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant I finally got the above post done. I had some good reasons why it took so long. A lingering cold, and a Grandpa. Its fun being at the granddaughters Basketball, soccer, and volleyball games. I know people outside the states of Kentucky and Indiana do not Capitalize the word Basketball. I'm not sure what the penalty is in Indiana, but here in Kentucky it's not a felony but darn close. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-14-2020, 08:11 AM	#327
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant I have drive train installed. I have different shaped bolts for engine mounts, and transmission mounts. Both had same size bolts, now head size and flange is different making it easier to assemble. Best thing about this installation is never having having to use the ill fitting CSR shield. I want to say more about CSR but I won't, you get the picture. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-14-2020, 10:31 AM	#328
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,651 Likes: 3,762 Liked 752 Times in 325 Posts	Re: Dumbo The Flying Elephant Larry, I apologize if I missed this earlier in this thread, but what did you use that fit better than the CSR. I am not a big fan of CSR either. Thanks, Bill

03-14-2020, 10:51 AM	#329
Larry Hill Live Reporter Join Date: Oct 2004 Location: Hickory, Ky Posts: 10,593 Likes: 1,887 Liked 10,601 Times in 2,193 Posts	Re: Dumbo The Flying Elephant TCI shields and a BFH. It ain't easy or fun adjusting stuff to make it fit. I don't think the knot on my left thumb will ever go away, missed swing of a four lbs hammer. __________________ IHM Used Parts https://ihmusedparts.com 888-821-1817

03-14-2020, 11:56 AM	#330
MR DERBY CITY VIP Member Join Date: Feb 2014 Location: Derby City, USA Posts: 3,575 Likes: 1,059 Liked 7,675 Times in 1,470 Posts	Re: Dumbo The Flying Elephant Larry, its a shame that DUMBO is all dressed up , with no place to go.... I followed your build very closely....