69 Camaro B/S

[Nmbr1GMfan]

Originally Posted by J&S Racing

I saw the adapters but figured it was just another place to leak or have a problem. For the extra 100 I felt it was well worth it.. think I have 6 change into the rad, fans, shroud and fittings.....I set out to way over build the car in case I wanna go a different route some day but most importantly I want to lessen any chance of problems so I can drive it like I stole it...

And that's a great plan.

[Hacksaw]

After I saw the pics of the cage in your car. I thought the fab guy did a nice job, ( post # 40 ) and in # 67 your bashing his work. ????

[J&S Racing]

The more time I spend with it the more disappointed I get... don't get me wrong, it had the potential to be a super nice piece but some of the fit is horrible and they tried to cover it with questionable welding along with other issues.. the recent realization that the bars are a $700 paperweight prompted a Google Search of his name where I found ALL Horror stories. Out of 3 or 4 guys I was the only one to get my car back in one piece.

[Nmbr1GMfan]

Whoa!

[J&S Racing]

I would like to thank site sponsor Gregg Kelly from MotorSports Innovations.
Picked up a IQ3 logger dash, MSD 7AL3 and HVC coil.

I was able to make a deal on a soft lok. Its on its way to Mcleod now for rebuild. Hopefully have everything wired by the time its back so I can fire this thing off!!!!


Got everything mounted today. start running wires tomorrow.



Boy it took a lot of work getting everything fit with the dash bar. The fuel gauge needed some trimming but I made it all work..


Sure had more important things to do but after a few Cape coddaaas I used a extra piece from the roll bar cover and made mirror block offs.

[David Lee]

who's relay panel are you using?

[J&S Racing]

Originally Posted by David Lee

who's relay panel are you using?

That's K&R's setup.. way overkill for what I'm doing but again I wanted options in the future..

Super nice deal!! The switch panel attaches with 1 plug. The kit comes with enough wire, ends and shrink tubing to wire a few cars. All the wires are labeled and it comes with a nice laminated schematic.

[James Perrone]

Shane why is the steering wheel so so square at the bottom?
Is it. 1 too many double cheeseburgers sandwiched between grilled cheeses?
Oh and a frosty shake. Lol

[Nmbr1GMfan]

Nice! That ignition is pimp! How long till the clutch comes back?

[David Lee]

Originally Posted by J&S Racing

That's K&R's setup.. way overkill for what I'm doing but again I wanted options in the future..

Super nice deal!! The switch panel attaches with 1 plug. The kit comes with enough wire, ends and shrink tubing to wire a few cars. All the wires are labeled and it comes with a nice laminated schematic.

Thanks, i think i will sell of that old painless panel I have