Transmission Shield 727

Tom Nolan · 09-12-2014, 10:14 AM

Will a CSR transmission shield for a 727 fit in a stock '64 Dodge 330 trans tunnel? What is everyone using? Tom Nolan

Mark Howes · 09-12-2014, 10:41 AM

It should. I had one in my '64 Belvedere.

You may have to roll the lip on the pinch weld in the floor but otherwise it should be fine

Jim Bailey · 09-12-2014, 11:08 AM

Tom, it's tight but it'll work. That's what I run. The strap buckle needs to be on the linkage side. Mine jams against the tunnel if installed on the passenger side, and doesn't allow proper bolt alignment. -JB-

ss3011 · 09-12-2014, 02:52 PM

I wished CSR would provide an access hole for the band adjustment on a Pro Trans !

Tom Nolan · 09-13-2014, 11:24 AM

Thanks for the advice! I ordered a shield.

Larry G · 09-15-2014, 04:49 PM

Do they have them in stock again I've been waiting to get one.

Tom Nolan · 09-15-2014, 05:33 PM

Delivery in mid October

Tom Nolan · 09-15-2014, 05:41 PM

//

09-12-2014, 10:14 AM	#1
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 179 Likes: 0 Liked 61 Times in 10 Posts	Transmission Shield 727 Will a CSR transmission shield for a 727 fit in a stock '64 Dodge 330 trans tunnel? What is everyone using? Tom Nolan

09-12-2014, 10:41 AM	#2
Mark Howes Member Join Date: Nov 2001 Location: Saint John, NB Canada Posts: 117 Likes: 299 Liked 68 Times in 22 Posts	Re: Transmission Shield 727 It should. I had one in my '64 Belvedere. You may have to roll the lip on the pinch weld in the floor but otherwise it should be fine

09-12-2014, 11:08 AM	#3
Jim Bailey Senior Member Join Date: Aug 2004 Posts: 699 Likes: 17 Liked 568 Times in 106 Posts	Re: Transmission Shield 727 Tom, it's tight but it'll work. That's what I run. The strap buckle needs to be on the linkage side. Mine jams against the tunnel if installed on the passenger side, and doesn't allow proper bolt alignment. -JB-

09-12-2014, 02:52 PM	#4
ss3011 Senior Member Join Date: Feb 2002 Location: Southeast Michigan Posts: 885 Likes: 63 Liked 221 Times in 102 Posts	Re: Transmission Shield 727 I wished CSR would provide an access hole for the band adjustment on a Pro Trans !

09-13-2014, 11:24 AM	#5
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 179 Likes: 0 Liked 61 Times in 10 Posts	Re: Transmission Shield 727 Thanks for the advice! I ordered a shield.

09-15-2014, 04:49 PM	#6
Larry G Junior Member Join Date: Nov 2003 Location: Burton, MI. Posts: 7 Likes: 0 Liked 0 Times in 0 Posts	Re: Transmission Shield 727 Do they have them in stock again I've been waiting to get one.

09-15-2014, 05:33 PM	#7
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 179 Likes: 0 Liked 61 Times in 10 Posts	Re: Transmission Shield 727 Delivery in mid October

09-15-2014, 05:41 PM	#8
Tom Nolan Member Join Date: Dec 2001 Location: Lacombe, Alberta, Canada Posts: 179 Likes: 0 Liked 61 Times in 10 Posts	Re: Transmission Shield 727 // Last edited by Tom Nolan; 09-15-2014 at 05:43 PM. Reason: /