|
04-03-2017, 10:25 PM | #1 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 900
Likes: 51
Liked 301 Times in 105 Posts
|
Bump steer in stock
Just double checking is it legal to use a bump steering kit in stock? We ran into a problem on the alignment with the tie rods being to long and the bump is way off. 4th gen f body. Thanks Tom
__________________
Tom Meyer 5240 SS Stock ??? |
04-04-2017, 12:19 AM | #2 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: Bump steer in stock
Quote:
Section 10A, page 7 SUSPENSION, Front Must retain complete stock front suspension system as produced by manufacturer for body used, aftermarket tie rods with Heim joints permitted. Lower control arm may be machined for larger shock diameter and mount. Lift kits/travel limiters prohibited. Sway bar optional. See General Regulations 3:4. |
|
04-04-2017, 07:34 PM | #3 |
Senior Member
Join Date: Jul 2014
Posts: 563
Likes: 34
Liked 47 Times in 32 Posts
|
Re: Bump steer in stock
Well there's your answer, shim that heim joint up or down to control the bump steer
|
|
|