|
![]() |
#1 |
Junior Member
Join Date: Apr 2010
Posts: 11
Likes: 1
Liked 0 Times in 0 Posts
|
![]()
I believe you have to use original equip seats for stock.
Is this true? Also, are the original seats relieved of the basic requirement that says you have to attach the seat to the roll bar? Where does it say that? Thanks Jeff |
![]() |
![]() |
![]() |
#2 |
Veteran Member
Join Date: Nov 2001
Location: NOO JOISEY nexta NOO YAWK
Posts: 5,879
Likes: 38
Liked 100 Times in 45 Posts
|
![]()
Jinxy,no reflection on you but I wouldn't touch that question with a ten foot pole.There was a thread a while back that turned into WWF wrestling before the dust settled.Good luck.
I'd just walk back slowly away from the keyboard.:>):>):>)
__________________
Former NHRA #1945 Former IHRA #1945 T/SA |
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Apr 2010
Posts: 11
Likes: 1
Liked 0 Times in 0 Posts
|
![]()
Are stock elim rules a secret? What gives?
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
![]()
Yes you have to use OEM seats. No they do not have to be bolted to the roll bar. That's all the anwser your going to get without all the worm's spilling out of the can.
__________________
2009 V/SA Record Holder |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Apr 2010
Posts: 11
Likes: 1
Liked 0 Times in 0 Posts
|
![]()
Thanks. I'm about to have a bar installed on a 1970 Dart with factory bench seat.
|
![]() |
![]() |
![]() |
#6 |
Veteran Member
|
![]()
Currently you must use OEM seats. You do not need to afix them in any way to the roll bar. I ain't sayin no more. Jim
__________________
Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 D2 National Open Stock Champion 1981 D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. ![]() |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Apr 2010
Posts: 11
Likes: 1
Liked 0 Times in 0 Posts
|
![]()
I'll use the factory seat for now, if they change I can switch to a race seat. Is this a change coming down the line at the NHRA?
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Nov 2001
Location: southern maine
Posts: 382
Likes: 144
Liked 64 Times in 14 Posts
|
![]()
Lets hope not...
__________________
Mark Callanan 1027 STK |
![]() |
![]() |
![]() |
#9 |
VIP Member
Join Date: May 2006
Location: Louisville , KY
Posts: 1,994
Likes: 63
Liked 270 Times in 68 Posts
|
![]()
The rule book says stock type seats. Travis clarified in an earlier thread that they must be correct for the year and model, although there are cars out there without the correct seats.
__________________
Greg Hill 4171 STK |
![]() |
![]() |
![]() |
#10 |
VIP Member
Join Date: Jan 2003
Location: jackson
Posts: 1,165
Likes: 0
Liked 5 Times in 3 Posts
|
![]()
I 2nd that Greg next motion
__________________
Greg Fulk 308 308X P/SA "ALL AMERICAN" |
![]() |
![]() |
![]() |
|
|