|
08-22-2015, 10:13 PM | #1 |
Member
Join Date: May 2014
Location: E TN
Posts: 435
Likes: 14
Liked 100 Times in 57 Posts
|
3rd gen F body, anyone run 29.5 MT slicks?
Anyone run a 29.5 diameter MT slick on their 3rd gen Camaro? I was wondering if the diameter fits in the wheel well opening. I've run a 29 hoosier and it fits with no problem.
|
08-27-2015, 02:41 PM | #2 |
Member
Join Date: Jun 2007
Location: St. Augustine, Fla.
Posts: 228
Likes: 478
Liked 37 Times in 8 Posts
|
Re: 3rd gen F body, anyone run 29.5 MT slicks?
[QUOTE=Eman;479931]Anyone run a 29.5 diameter MT slick on their 3rd gen Camaro? I was wondering if the diameter fits in the wheel well opening. I've run a 29 hoosier and it fits with no problem.
If the offset is correct you shouldn't encounter any problems. My 3rd Gen is a Z/28 so I did have to "adjust" the ground effect trim panels at the front of the wheel well slightly. I use the MT 29.5 3056ST tire on 8" wheel. Be sure to roll or remove the fender lip.
__________________
Reggie Winkles 2650/Stock |
08-27-2015, 03:54 PM | #3 |
Junior Member
Join Date: Aug 2015
Location: Hattiesburg, Ms
Posts: 53
Likes: 0
Liked 0 Times in 0 Posts
|
Re: 3rd gen F body, anyone run 29.5 MT slicks?
Do you remember what wheel offset you used?
|
08-27-2015, 07:36 PM | #4 |
Member
Join Date: May 2014
Location: E TN
Posts: 435
Likes: 14
Liked 100 Times in 57 Posts
|
Re: 3rd gen F body, anyone run 29.5 MT slicks?
I've got 5.5" BS, but could go to a 6.5" BS. I had 6.5" with a spacer. Now I've got more room behind the tire so it would work without spacers.
My concern is with the tire diameter in the wheel well. I see stockers run 30"x9". Surely if they fit a 29.5" will fit. |
Thread Tools | |
Display Modes | |
|
|