1969 camaro g/s

gearjammer9025 · 03-15-2011, 11:56 AM

Wanting to know if you can get a 10" rim with 29.5x9x15 tire under a 69 camaro.... is there enough room? Remember were runing stock. with a four speed. Any input wood be nice. Thanks

Bill Grubbs · 03-15-2011, 02:46 PM

Yes, but I can not rember the correct backspacing.

Dana Fitzpatrick · 03-15-2011, 05:25 PM

I have 15x10's on my 69, 4 7/8 inch backspace. Stock,uncut wheelwells.This is with a 9x28 inch slick,though. 29.5 inch tire will be very close up front.

Alan Roehrich · 03-15-2011, 06:14 PM

Yes, you can. But you need to make sure you notch the leading and trailing edge of the fenders, especially if you run a bias ply tire like most people do with a stick car.

03-15-2011, 11:56 AM	#1
gearjammer9025 Junior Member Join Date: Mar 2011 Posts: 22 Likes: 0 Liked 0 Times in 0 Posts	1969 camaro g/s Wanting to know if you can get a 10" rim with 29.5x9x15 tire under a 69 camaro.... is there enough room? Remember were runing stock. with a four speed. Any input wood be nice. Thanks

03-15-2011, 02:46 PM	#2
Bill Grubbs Member Join Date: Oct 2002 Location: Magnolia, Texas Posts: 404 Likes: 1 Liked 461 Times in 61 Posts	Re: 1969 camaro g/s Yes, but I can not rember the correct backspacing.

03-15-2011, 05:25 PM	#3
Dana Fitzpatrick Member Join Date: May 2009 Posts: 148 Likes: 4 Liked 10 Times in 6 Posts	Re: 1969 camaro g/s I have 15x10's on my 69, 4 7/8 inch backspace. Stock,uncut wheelwells.This is with a 9x28 inch slick,though. 29.5 inch tire will be very close up front.

03-15-2011, 06:14 PM	#4
Alan Roehrich VIP Member Join Date: May 2006 Location: Murfreesboro TN Posts: 4,918 Likes: 998 Liked 1,049 Times in 276 Posts	Re: 1969 camaro g/s Yes, you can. But you need to make sure you notch the leading and trailing edge of the fenders, especially if you run a bias ply tire like most people do with a stick car. __________________ Alan Roehrich 212A G/S