silicon gasket glue?

rod · 08-24-2016, 10:38 PM

I absolutely HATE the new permatex junk. is there any alternative? seems loctite has bought up everybody. still there must be some other brand.
thanks Rod in AZ

PROSTOCKTOM · 08-24-2016, 11:12 PM

Loctite 598 Black

Tom

Eman · 08-25-2016, 08:15 AM

Don't know what you're "glueing". I've had success with Ultra gray or black. But generally I let gaskets do their job and use sealer in places like the ends of the intake on a SBC.

Lew Silverman · 08-25-2016, 09:53 AM

I've had good success with Valco Products. I've used their "Tube-Grip" for over 20 years and it sure makes things easier!

http://www.valco-cp.com/default.htm

Alan Nyhus · 08-26-2016, 08:54 AM

+1 on Valco. Their Aluminized silicone sealer is a great product.

The last Permatex black silicone I used was j-u-n-k.

Chris Hardy · 09-02-2016, 10:49 PM

Locktite 5900. You'll not ever use anything else after you try this. It even sticks thru oil. Yes, I seriously sticks and seals even if there is oil on the surfaces.

cad · 09-03-2016, 09:37 AM

I highly recommend this:
https://www.amazon.com/Genuine-Ford-.../dp/B000NUD02W

5oz caulk tube is plenty for 1 engine.

08-24-2016, 10:38 PM	#1
rod Member Join Date: Dec 2009 Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66 Posts: 307 Likes: 0 Liked 17 Times in 13 Posts	silicon gasket glue? I absolutely HATE the new permatex junk. is there any alternative? seems loctite has bought up everybody. still there must be some other brand. thanks Rod in AZ

08-24-2016, 11:12 PM	#2
PROSTOCKTOM Junior Member Join Date: Aug 2016 Location: Indiana Posts: 17 Likes: 0 Liked 0 Times in 0 Posts	Re: silicon gasket glue? Loctite 598 Black Tom

08-25-2016, 08:15 AM	#3
Eman Member Join Date: May 2014 Location: E TN Posts: 441 Likes: 14 Liked 105 Times in 60 Posts	Re: silicon gasket glue? Don't know what you're "glueing". I've had success with Ultra gray or black. But generally I let gaskets do their job and use sealer in places like the ends of the intake on a SBC.

08-25-2016, 09:53 AM	#4
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,438 Likes: 372 Liked 129 Times in 59 Posts	Re: silicon gasket glue? I've had good success with Valco Products. I've used their "Tube-Grip" for over 20 years and it sure makes things easier! http://www.valco-cp.com/default.htm __________________ Lew Silverman #2070 "The Wagon Master" N/SA

08-26-2016, 08:54 AM	#5
Alan Nyhus VIP Member Join Date: Dec 2002 Location: Lower Dakota territory Posts: 1,166 Likes: 1,017 Liked 762 Times in 226 Posts	Re: silicon gasket glue? +1 on Valco. Their Aluminized silicone sealer is a great product. The last Permatex black silicone I used was j-u-n-k. __________________ "That'll never work....."

09-02-2016, 10:49 PM	#6
Chris Hardy Junior Member Join Date: Jul 2012 Location: Muskegon, Michigan Posts: 57 Likes: 0 Liked 4 Times in 1 Post	Re: silicon gasket glue? Locktite 5900. You'll not ever use anything else after you try this. It even sticks thru oil. Yes, I seriously sticks and seals even if there is oil on the surfaces.

09-03-2016, 09:37 AM	#7
cad Senior Member Join Date: Apr 2009 Location: Omaha, NE Posts: 673 Likes: 141 Liked 72 Times in 40 Posts	Re: silicon gasket glue? I highly recommend this: https://www.amazon.com/Genuine-Ford-.../dp/B000NUD02W 5oz caulk tube is plenty for 1 engine.