|
06-25-2013, 09:59 PM | #1 |
Junior Member
Join Date: Jun 2013
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
lean out valve info for running alchol
Does anyone use a legris slide valve for a lean out valve and if so which one do you use part # ?
|
06-26-2013, 04:50 PM | #2 |
Junior Member
Join Date: Dec 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
Re: lean out valve info for running alchol
Yes I use one you can get them from McMaster-Carr it is called a slide-sleeve brass valve part#4622k33 and the price is $23.61 I hope this helps you out.
|
06-26-2013, 11:41 PM | #3 |
Junior Member
Join Date: Jun 2013
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
Re: lean out valve info for running alchol
Yes it does.
Does the 1/4 npt lean it out enough? |
06-27-2013, 05:58 AM | #4 |
Junior Member
Join Date: Dec 2012
Posts: 14
Likes: 0
Liked 0 Times in 0 Posts
|
Re: lean out valve info for running alchol
Yes I have no problem getting enough heat in the motor. I use barbs for 1/2" fuel hose. When the valve is open the motor pickup 500 RPM.
|
06-27-2013, 05:42 PM | #5 |
Junior Member
Join Date: Jun 2013
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
Re: lean out valve info for running alchol
Thanks, SG192L
Last edited by S/G 316H; 06-27-2013 at 05:53 PM. |
|
|