Cross member 4sp Jerico in 67 Camaro??

rs6868 · 04-20-2014, 12:58 AM

Hey guy's...question for you blokes running Stockers with a 4sp Jerico in a 1st gen Camaro...I've got a 67 Camaro and I'm fitting a DR4-4 Jerico...I've purchased the factory 4 speed cross member from Classic Industries but with a factory rubber GM trans mount it sits the transmission way to high in the tunnel...what do you guy's use for a cross member and trans mount when running a Jerico or is a custom cross member the only option??

Thanks in advance,
Ross.

Jim Hawkins · 04-20-2014, 01:14 AM

My 67 camaro with a Jerico trans. has a custom crossmember. Not sure how much different it is as far as height from a stock crossmember. Never had a stock one in the car.

Greg Barsamian · 04-20-2014, 05:31 AM

Had to cut & re-weld the "saddle" or "mount" on the cross member in my Chevelle in order to lower the angle of the transmission to the rear end.

Run to Rund · 04-20-2014, 10:46 PM

The Jerico DR4 was a bolt-in for my 66 A body, except that I trimmed down a couple ribs on the top cover for more clearance to the hump.

04-20-2014, 12:58 AM	#1
rs6868 Junior Member Join Date: Sep 2012 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	Cross member 4sp Jerico in 67 Camaro?? Hey guy's...question for you blokes running Stockers with a 4sp Jerico in a 1st gen Camaro...I've got a 67 Camaro and I'm fitting a DR4-4 Jerico...I've purchased the factory 4 speed cross member from Classic Industries but with a factory rubber GM trans mount it sits the transmission way to high in the tunnel...what do you guy's use for a cross member and trans mount when running a Jerico or is a custom cross member the only option?? Thanks in advance, Ross.

04-20-2014, 01:14 AM	#2
Jim Hawkins Member Join Date: Jan 2010 Posts: 186 Likes: 82 Liked 109 Times in 32 Posts	Re: Cross member 4sp Jerico in 67 Camaro?? My 67 camaro with a Jerico trans. has a custom crossmember. Not sure how much different it is as far as height from a stock crossmember. Never had a stock one in the car.

04-20-2014, 05:31 AM	#3
Greg Barsamian VIP Member Join Date: Jan 2002 Location: Central Massachusetts Posts: 1,383 Likes: 608 Liked 390 Times in 84 Posts	Re: Cross member 4sp Jerico in 67 Camaro?? Had to cut & re-weld the "saddle" or "mount" on the cross member in my Chevelle in order to lower the angle of the transmission to the rear end.

04-20-2014, 10:46 PM	#4
Run to Rund Senior Member Join Date: Sep 2007 Posts: 574 Likes: 6 Liked 44 Times in 22 Posts	Re: Cross member 4sp Jerico in 67 Camaro?? The Jerico DR4 was a bolt-in for my 66 A body, except that I trimmed down a couple ribs on the top cover for more clearance to the hump.