|
04-17-2024, 08:43 AM | #1 |
Senior Member
Join Date: Aug 2004
Posts: 700
Likes: 17
Liked 572 Times in 108 Posts
|
ATTENTION - Front Wheel inspections!
All racers should pay close attention to the condition of their front wheels. As a Tech person for the past three years, I've seen multiple issues with front wheels. (Three in the first 2 races this year.) The problem seems to be with the lightweight 5 spoke, M/T and Weld one-piece forged wheels. I believe these particular models are older and have since been discontinued, but a lot of racers still run them. Watch carefully near the machined area for the lug nut on each of the spokes, and the thin area that makes up the bead on the edge of the rim. This is where we're finding cracks. My guess is along with age, braking, and wheelies, it's taking their toll on the rims. Make it part of you daily inspection! I'd hate to see someone get hurt.
|
04-17-2024, 01:11 PM | #2 |
Senior Member
Join Date: Jul 2003
Posts: 771
Likes: 588
Liked 840 Times in 293 Posts
|
Re: ATTENTION - Front Wheel inspections!
We broke the Monocoques with all the round holes in them. Broke one bad at the Byron
origainal Class Nationals. Had to borrow an oddball to make the nexst round as it was in eliminations.
__________________
Jeff Niceswanger 3740 SS |
Liked |
04-17-2024, 03:34 PM | #3 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,533
Likes: 2,233
Liked 1,864 Times in 574 Posts
|
Re: ATTENTION - Front Wheel inspections!
I have cracked several Bogarts/Mono wheel on my Stocker
and once gone into a serious wobble in High gear when the wheel began to distort!
__________________
John Irving 741 Stock 741 Super Stock |
04-17-2024, 04:01 PM | #4 |
Senior Member
Join Date: Mar 2002
Posts: 699
Likes: 29
Liked 224 Times in 90 Posts
|
Re: ATTENTION - Front Wheel inspections!
the 3 1/2" Supertricks used to crack on the groove that the valve stem is closest too. I had three of them crack and the way i'd notice is when the tire was losing air pressure. I welded them and reused them after running out of the supply of unpolished ones.
|
04-17-2024, 05:45 PM | #5 | |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 551
Likes: 269
Liked 228 Times in 78 Posts
|
Re: ATTENTION - Front Wheel inspections!
Quote:
|
|
04-18-2024, 08:49 AM | #6 |
Senior Member
Join Date: Aug 2004
Posts: 700
Likes: 17
Liked 572 Times in 108 Posts
|
Re: ATTENTION - Front Wheel inspections!
Yes, the M/T have a dual bolt pattern.
|
04-18-2024, 01:24 PM | #7 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,781
Likes: 71
Liked 401 Times in 192 Posts
|
Re: ATTENTION - Front Wheel inspections!
read my comments from 4 years ago...
https://classracer.com/classforum/sh...t=73282&page=2 After 2 sets of Weld's Magnum Frontrunner failing, I switch to Weld's Alumastar Front Runner that have been in service for 2 1/2 seasons without issue. Last edited by 1320racer; 04-18-2024 at 01:40 PM. |
Liked |
|
|