|
09-26-2020, 03:59 PM | #1 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
350/360/330 SBC with Edelbrock heads
Is an aftermarket intake legal?
__________________
Larry Woodfin 471W |
09-26-2020, 04:20 PM | #2 |
Junior Member
Join Date: Nov 2014
Location: Celina, Ohio
Posts: 25
Likes: 44
Liked 0 Times in 0 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Casting No's10185024 ,3972110, and 3972116 Aluminum
__________________
Rodney Long - #3488 Stock |
09-26-2020, 11:15 PM | #3 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
A quick scan shows finding the correct intake will be a challenge. Anybody have one?
__________________
Larry Woodfin 471W |
09-27-2020, 06:43 AM | #4 |
Junior Member
Join Date: Nov 2014
Location: Celina, Ohio
Posts: 25
Likes: 44
Liked 0 Times in 0 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
pm sent
__________________
Rodney Long - #3488 Stock |
09-27-2020, 08:50 AM | #5 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Rodney, Thanks, I will follow up.
__________________
Larry Woodfin 471W |
09-27-2020, 08:58 PM | #6 |
Senior Member
Join Date: Mar 2008
Location: Chicago, IL
Posts: 701
Likes: 427
Liked 170 Times in 38 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Larry, we have used all 3 intakes for this combo. The 110 is expensive and hard to find (for a SBC part), and they all 3 perform the same from what I’ve seen. I have an 024 on one motor and a 110 on the other right now. There was a 116 or 024 on eBay a while back, if I remember right it may have been Steve Ficcaci that had it listed.
__________________
3207 D/SA, C/ED |
Liked |
09-27-2020, 09:42 PM | #7 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Andrew,
do you run the iron or aluminum heads? What class and what performance are you achieving.
__________________
Larry Woodfin 471W |
09-27-2020, 09:54 PM | #8 | |
Senior Member
Join Date: Mar 2008
Location: Chicago, IL
Posts: 701
Likes: 427
Liked 170 Times in 38 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Quote:
I run D/SA and have run as quick as 10.23 at 127, which was at Indy last year. If you’re interested in a second gen Camaro, I think there are a lot of good options. The lower compression 71-72 Z28 combo is good as well, and I think the 73 Z28 with the Quadrajet has a ton of potential, as it’s only rated at 294.
__________________
3207 D/SA, C/ED |
|
09-27-2020, 10:09 PM | #9 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
Andrew,
I have a 1970 Camaro Z28 spotted that is in good condition. It is all original. What does it take to convert a 70 model to 71 or 72 or 73?
__________________
Larry Woodfin 471W |
09-27-2020, 10:22 PM | #10 |
Senior Member
Join Date: Mar 2008
Location: Chicago, IL
Posts: 701
Likes: 427
Liked 170 Times in 38 Posts
|
Re: 350/360/330 SBC with Edelbrock heads
I believe the only major difference is the grille, which is different between the 70-71 and the 72-73.
__________________
3207 D/SA, C/ED |
|
|