|
04-28-2007, 08:43 PM | #1 |
Senior Member
Join Date: Feb 2006
Posts: 629
Likes: 112
Liked 133 Times in 48 Posts
|
Tranny shields
I have a 70 Chevelle with a turbo 400.Can anyone tell me what tranny shield they use.I do not want to use a blanket and the one I tried hits the tunnel.I really don't want to cut or hammer the tunnel.Thanx in advance.
__________________
The more people I meet the more I like my dog Kevin |
04-29-2007, 03:11 PM | #2 |
Member
Join Date: Dec 2006
Location: Indy
Posts: 422
Likes: 0
Liked 0 Times in 0 Posts
|
I have the C.S.I. one piece shield on my TH-400, in a 79 Malibu and it touches nothing. ??
Bolt access is tight at the pinch weld for the driver side middle bell bolt, but no worse than the factory installation of the TH-350. "Despite the high cost of living, it remains popular" Dave Cook C375
__________________
"Despite the high cost of living, it remains popular." Dave Cook NHRA N375 |
04-29-2007, 03:16 PM | #3 |
Senior Member
Join Date: Apr 2003
Posts: 728
Likes: 4
Liked 13 Times in 7 Posts
|
I can't get the CSR composite shield to work in a 69 camaro, without a body hammer, so forget the CSR in a 70 Chevellle. Maybe the later model cars have more room.
__________________
N/A |
05-02-2007, 12:36 PM | #4 |
Senior Member
Join Date: Apr 2004
Posts: 559
Likes: 1
Liked 399 Times in 111 Posts
|
Tommy Waters in Fl, fit great, just use a Turbo-Action step out arm on the linkage, works great. Brian
|
|
|