|
01-29-2016, 05:18 PM | #1 |
Junior Member
Join Date: Mar 2008
Location: cicero n.y.
Posts: 29
Likes: 7
Liked 0 Times in 0 Posts
|
Float level 4300
What is a good float level on a stocker Motorcraft 4300 carb .Stock intake AMC 360 .Thanks.
__________________
Rich Freitag 1440 SS |
02-02-2016, 07:32 PM | #2 |
Junior Member
Join Date: Mar 2008
Location: cicero n.y.
Posts: 29
Likes: 7
Liked 0 Times in 0 Posts
|
Re: Float level 4300
Ok so everyone replied all at once,I did it my self ,set the floats at pri 13/16 sec 1/16.Also opened up the fuel inlets,modified the needle and seat(notch the bottom of the inlet ).I run 6psi.
__________________
Rich Freitag 1440 SS |
02-13-2016, 03:33 AM | #3 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,528
Likes: 2,220
Liked 1,791 Times in 571 Posts
|
Re: Float level 4300
George Thompson "Carb. Flow Engineering" is only 4300 genius
I know......I will ask him tomorrow at races and see if he recalls without checking his notes or can call me.
__________________
John Irving 741 Stock 741 Super Stock Last edited by GTX JOHN; 02-13-2016 at 03:35 AM. |
02-17-2016, 11:47 AM | #4 |
Junior Member
Join Date: Mar 2008
Location: cicero n.y.
Posts: 29
Likes: 7
Liked 0 Times in 0 Posts
|
Re: Float level 4300
My floats are all set I did my own test &tune,for my combo pri13/16 sec1/16.Works for me.
__________________
Rich Freitag 1440 SS |
02-20-2016, 05:17 PM | #5 |
Junior Member
Join Date: Mar 2008
Location: cicero n.y.
Posts: 29
Likes: 7
Liked 0 Times in 0 Posts
|
Re: Float level 4300
I removed the power valve ,put a 5/16 -24 plug .
__________________
Rich Freitag 1440 SS |
Thread Tools | |
Display Modes | |
|
|