|
04-26-2015, 08:57 AM | #1 |
Member
Join Date: Dec 2008
Location: Wingdale, NY
Posts: 302
Likes: 27
Liked 54 Times in 16 Posts
|
What size fuel line?
For my 396/325 Chevy would a 3/8 - 6AN be good or 1/2 8AN ? Have a 300-400 GPH pump I bought years ago from a retiring Pro Stock truck racer. I used in my 68 Impala with same combination. Can't remember what size line I used.
Will Lamprecht I/SA 65 Impala in progress |
04-26-2015, 09:03 AM | #2 |
Junior Member
Join Date: Nov 2006
Posts: 50
Likes: 5
Liked 1 Time in 1 Post
|
Re: What size fuel line?
Minimum #8 from pump to front.
|
04-26-2015, 09:38 AM | #3 |
Member
Join Date: Dec 2008
Location: Wingdale, NY
Posts: 302
Likes: 27
Liked 54 Times in 16 Posts
|
Re: What size fuel line?
Thanks RW OK 1/2" would 5/8" then be too much?
Will |
04-26-2015, 10:14 AM | #4 |
Senior Member
Join Date: May 2004
Location: Brookfield, CT
Posts: 708
Likes: 13
Liked 322 Times in 68 Posts
|
Re: What size fuel line?
At least#8 would use#10,with a return system,I've seen something with a Q-jet using a return line.Lee.
__________________
Lee Valentine 1661 STK |
04-26-2015, 01:19 PM | #5 |
Member
Join Date: Dec 2008
Location: Wingdale, NY
Posts: 302
Likes: 27
Liked 54 Times in 16 Posts
|
Re: What size fuel line?
Thanks Lee- Yes I am going with the #8 and I do run a return line with my pimp. I am a Div 1 NED racers too, hope to see you real soon!
Will Lamprecht |
04-26-2015, 03:15 PM | #6 |
Senior Member
Join Date: May 2004
Location: Brookfield, CT
Posts: 708
Likes: 13
Liked 322 Times in 68 Posts
|
Re: What size fuel line?
Will I keep my race cars in Billings,go through Wingdale often.
__________________
Lee Valentine 1661 STK |
04-26-2015, 03:18 PM | #7 |
VIP Member
Join Date: Oct 2002
Location: Richmond Indiana
Posts: 1,197
Likes: 5
Liked 32 Times in 19 Posts
|
Re: What size fuel line?
Note that the return line must be really big to not increase the fuel pressure at the carb. If you find the pressure cannot be decreased to below where you want to run it as a test while idling the pressure is return line resistance..not pump pressure. We used copper gas line 1/2 diameter as return line or pressure at carb too high for Q JET. They seem to like 6.5 to 7 area
|
|
|