|
02-25-2015, 11:13 PM | #1 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,416
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
SBC Roller rockers Accuracy
I have a cam with a few thou safety factor built into the lobe lift, so now I need rockers that are true 1.5 or at least check that way with near stock length push rods.
What brand in new ones, or I'd take some low mileage used ones (7/16 hole). Thanks in advance
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
02-26-2015, 12:06 AM | #2 | |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,991
Likes: 693
Liked 1,457 Times in 543 Posts
|
Re: SBC Roller rockers Accuracy
Quote:
Harland Sharp makes a very accurate SBC roller rocker. Also, I believe T&D Machine is also making Stock Eliminator legal roller rockers. |
|
02-26-2015, 12:28 AM | #3 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,416
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: SBC Roller rockers Accuracy
I have been told that. Also told if you want a say a 1.46 you can get that too ..within a matter of a few days.
I like the sound of that.. .Anybody else...similar experience?
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
02-26-2015, 07:10 AM | #4 |
Member
Join Date: Nov 2005
Location: Northern Ohio
Posts: 201
Likes: 690
Liked 33 Times in 15 Posts
|
Re: SBC Roller rockers Accuracy
Mark,
Harland Sharp will work with you and build what you want. Call them and ask for Randy Jr.
__________________
Joe Marcinowski 3377 STK |
02-26-2015, 08:31 AM | #5 |
VIP Member
Join Date: May 2006
Location: Murfreesboro TN
Posts: 4,914
Likes: 995
Liked 1,042 Times in 274 Posts
|
Re: SBC Roller rockers Accuracy
Mark, talk to Tim Cole at Comp Cams. He had special rockers built specifically for Stock Eliminator, they're a true 1.5:1 ratio, they're fully rebuildable, and come with a set of ARP studs. They keep them on the shelf and ready to ship.
__________________
Alan Roehrich 212A G/S |
02-26-2015, 09:54 AM | #6 |
VIP Member
Join Date: Oct 2008
Location: Somerset,Ky
Posts: 1,303
Likes: 198
Liked 116 Times in 48 Posts
|
Re: SBC Roller rockers Accuracy
Mark,
I needed some the opposite way last year,so got a few sets in hoping they would be off,tried scorpion, and ones that Liberty engine parts sells,and they all were good on the ratio,I was surprised,the liberty ones I sell for about $175.00 alum or steel version,maybe PRW makes them Mike Taylor 3601 |
02-26-2015, 12:25 PM | #7 |
VIP Member
Join Date: Dec 2002
Location: Lower Dakota territory
Posts: 1,166
Likes: 1,018
Liked 762 Times in 226 Posts
|
Re: SBC Roller rockers Accuracy
Harland Sharp will send you a single rocker that's exactly 1.5 (for example) as a checker. Based on that, they can alter the ratio for an entire set.
Worked for me. -Al
__________________
"That'll never work....." |
|
|