327 small shaft in 350 main block - main bearings?

Dragsinger · 08-08-2014, 10:26 AM

I "think" there is a main bearing that allows a small main 327 shaft in a large main 350 block. Do we have a part number/vendor for that main bearing set?

FED 387 · 08-08-2014, 10:37 AM

larry-- you will need a Clevite MS-1110H bearing set---FED387

Dragsinger · 08-08-2014, 10:56 AM

Thank You

GEORGE PETERSON · 08-08-2014, 10:56 AM

Clevite has discontinued these bearings. You have to use bearing spacers. Race Engineering has them in stock.

George Peterson
D/S 4448

FED 387 · 08-08-2014, 12:25 PM

OK Clevite may have discontinued them but they are still available from many sources--- jegs/Summit/Speedway motors and many others--- Also look into KingBearings.com looa at their HP line and go to buy bearings--- a e catalog will pop up and you can put your dimensions in they will give you the appropriate bearing part number---they are out there just hafta look a little Good Luck--FED387

Mike Taylor 3601 · 08-09-2014, 02:11 PM

I got a set of MS1110H clevite about 6 months ago, thought King had them but it was rod bearing they have to use big journal rod on small journal crank

Mike Taylor 3601

08-08-2014, 10:26 AM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	327 small shaft in 350 main block - main bearings? I "think" there is a main bearing that allows a small main 327 shaft in a large main 350 block. Do we have a part number/vendor for that main bearing set? __________________ Larry Woodfin 471W

08-08-2014, 10:37 AM	#2
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,349 Likes: 329 Liked 280 Times in 150 Posts	Re: 327 small shaft in 350 main block - main bearings? larry-- you will need a Clevite MS-1110H bearing set---FED387

08-08-2014, 10:56 AM	#3
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	Re: 327 small shaft in 350 main block - main bearings? Thank You __________________ Larry Woodfin 471W

08-08-2014, 10:56 AM	#4
GEORGE PETERSON Junior Member Join Date: Oct 2007 Posts: 39 Likes: 29 Liked 11 Times in 6 Posts	Re: 327 small shaft in 350 main block - main bearings? Clevite has discontinued these bearings. You have to use bearing spacers. Race Engineering has them in stock. George Peterson D/S 4448

08-08-2014, 12:25 PM	#5
FED 387 VIP Member Join Date: Jun 2006 Posts: 3,349 Likes: 329 Liked 280 Times in 150 Posts	Re: 327 small shaft in 350 main block - main bearings? OK Clevite may have discontinued them but they are still available from many sources--- jegs/Summit/Speedway motors and many others--- Also look into KingBearings.com looa at their HP line and go to buy bearings--- a e catalog will pop up and you can put your dimensions in they will give you the appropriate bearing part number---they are out there just hafta look a little Good Luck--FED387

08-09-2014, 02:11 PM	#6
Mike Taylor 3601 VIP Member Join Date: Oct 2008 Location: Somerset,Ky Posts: 1,303 Likes: 198 Liked 116 Times in 48 Posts	Re: 327 small shaft in 350 main block - main bearings? I got a set of MS1110H clevite about 6 months ago, thought King had them but it was rod bearing they have to use big journal rod on small journal crank Mike Taylor 3601