|
03-30-2017, 05:46 PM | #1 |
Junior Member
Join Date: Dec 2015
Location: waconia mn
Posts: 90
Likes: 21
Liked 9 Times in 5 Posts
|
How many passes to a set of tires?
How many passes can a guy put on a set of tires before 60fts state going away? Thanks Jake from MN
|
03-30-2017, 06:03 PM | #2 |
Senior Member
Join Date: Mar 2002
Location: TN
Posts: 514
Likes: 358
Liked 204 Times in 72 Posts
|
Re: How many passes to a set of tires?
That is a loaded question. Auto, Stick, Bias, Radial, how long of a burn out, engine combo are all factors that have a bearing on tire life. The best indicator is your time slip.
__________________
Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects. |
03-30-2017, 06:41 PM | #3 |
Junior Member
Join Date: Dec 2015
Location: waconia mn
Posts: 90
Likes: 21
Liked 9 Times in 5 Posts
|
Re: How many passes to a set of tires?
Powerglide, bias ply, 3300lb car 450hp short burnout.
|
03-30-2017, 11:30 PM | #4 |
Member
Join Date: Jun 2004
Location: Kennedale,Tx
Posts: 227
Likes: 0
Liked 2 Times in 2 Posts
|
Re: How many passes to a set of tires?
Fairly heavy car,not a lot of HP,bias ply slicks, I would run those suckers till you start seeing cords...or they start spinning
|
03-31-2017, 09:58 AM | #5 |
Member
Join Date: Aug 2016
Posts: 173
Likes: 113
Liked 62 Times in 29 Posts
|
Re: How many passes to a set of tires?
I used to get 250+ passes (1/4 mile) going 10.00 with 29x10.5's Hoosiers @ 18 - 20psi, would still work with cords showing, that is when they got tossed! 3300lbs 1.80 Powerglide 4.30 gears at the time, 5500 rpm convertor. Put a lot of nitrous passes on them too going 8.8 @ 155+..........
|
|
|