|
08-01-2020, 11:02 AM | #1 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 901
Likes: 51
Liked 301 Times in 105 Posts
|
Help no Revese
Was going to go to Thunder Valley today, started the stocker up and it would not backup. It has a 200 with auto shift, everything worked when we parked it. Had it out on the hyway for a down and back a few months ago all was fine. 402 329 6795 402 750 0882 Tom
__________________
Tom Meyer 5240 SS Stock ??? |
08-01-2020, 06:12 PM | #2 |
Junior Member
Join Date: Apr 2013
Location: NC (nothing compares)
Posts: 48
Likes: 33
Liked 133 Times in 28 Posts
|
Re: Help no Revese
Tom;
I know next nothing about the GM200 but my guess is a stuck valve. Try draining and replacing the ATF and filter with fresh. When you remove the pan and filter, if you see lots of metal and debris just take it out and see what broke. Chuck |
08-01-2020, 06:23 PM | #3 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,418
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: Help no Revese
Typos aside, how many "back ups" on the unit? Did it ever slip when backing up, especially uphill? How many frictions in the low/rev?
One possibility that's easy ..All the rest, out she comes.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
08-02-2020, 12:32 PM | #4 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 901
Likes: 51
Liked 301 Times in 105 Posts
|
Re: Help no Reverse
Pulled the pan had some stuff on the magnet so we just pulled it. Now who does a good job on 200s in the midwest? We know nothing about this trans or converter so i guess it time to find out. Tom
__________________
Tom Meyer 5240 SS Stock ??? |
08-02-2020, 01:54 PM | #5 |
Senior Member
Join Date: Jan 2008
Location: 100th Meridian
Posts: 570
Likes: 116
Liked 280 Times in 139 Posts
|
Re: Help no Reverse
Jeff Nibaur in Elma IA.,he went through mine years ago,worked great.He runs a 71 Chevelle in B/SA.I lost his contact info over the years,Chris Knudsen knew him well...gsa612
Last edited by gsa612; 08-02-2020 at 09:38 PM. |
08-02-2020, 04:05 PM | #6 |
Senior Member
Join Date: Jun 2012
Posts: 627
Likes: 517
Liked 882 Times in 198 Posts
|
Re: Help no Revese
Tim Wudarzyck, Kansas. Does an excellent job. They run a Stock & Super Stock car. He's up to date on 200's, as good as your going to find.
J.R. |
Liked |
08-03-2020, 06:00 PM | #7 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 901
Likes: 51
Liked 301 Times in 105 Posts
|
Re: Help no Revese
Got Tylers number? Thanks Tom
__________________
Tom Meyer 5240 SS Stock ??? |
08-03-2020, 06:22 PM | #8 |
Senior Member
Join Date: Mar 2006
Posts: 958
Likes: 618
Liked 165 Times in 60 Posts
|
Re: Help no Revese
785-842-0865
__________________
Sean Marconette 84 Mustang 5060 SS/N |
04-25-2021, 09:14 PM | #9 |
Senior Member
Join Date: Aug 2003
Location: Pierce NE
Posts: 901
Likes: 51
Liked 301 Times in 105 Posts
|
Re: Help no Revese
Well frustration continues, put are trans back in today have reverse and low but shifts to second and then goes away no third. Has a turbo action auto shift. We ended up manual shifting at Madison with a different trans and powering up solenoids. Will not up shift in burnout or pit mode. Are these valve bodies junk? Who can we talk to to make this thing work. Thanks Tom
__________________
Tom Meyer 5240 SS Stock ??? |
04-26-2021, 11:32 PM | #10 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,418
Likes: 2,582
Liked 4,453 Times in 1,694 Posts
|
Re: Help no Revese
What was wrong with it the first time? Who fixed that issue?
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
Liked |
|
|