Water box rpm issue

mschafer · 06-15-2022, 11:57 AM

Having a intermittent issue after setting line lock in the water box, as soon as I start to increase rpm to get tires spinning engine acts like it hit rev limiter or two step setting, so no burnout but car will go down track with no issue, other than 60' affected. All MSD products in car and less than 3 years old, car has Painless wiring and no lack of ground wires. Ohm'd wires and coil wire[new last summer 74 ohms] and all wires less the 150. MSD digital 6al box and digital two step are 3 years old, called MSD yesterday, but no real answer to issue. Just looking to see if anyone else has had this issue or knows someone who did and what they found-thanks in advance.

06-15-2022, 11:57 AM	#1
mschafer Junior Member Join Date: Oct 2014 Posts: 42 Likes: 0 Liked 9 Times in 8 Posts	Water box rpm issue Having a intermittent issue after setting line lock in the water box, as soon as I start to increase rpm to get tires spinning engine acts like it hit rev limiter or two step setting, so no burnout but car will go down track with no issue, other than 60' affected. All MSD products in car and less than 3 years old, car has Painless wiring and no lack of ground wires. Ohm'd wires and coil wire[new last summer 74 ohms] and all wires less the 150. MSD digital 6al box and digital two step are 3 years old, called MSD yesterday, but no real answer to issue. Just looking to see if anyone else has had this issue or knows someone who did and what they found-thanks in advance.