|
![]() |
#1 |
Member
Join Date: Mar 2010
Location: Zimmerman, MN
Posts: 237
Likes: 25
Liked 0 Times in 0 Posts
|
![]()
Have any Factory Cobra Jet owners experienced original fuel line leaking
problems. My 2010 has developed this issue. Could be related to minimal usage. My 2012 is raced every summer - noticed some wet areas at connections after recent engine reinstall. Using VP-16. Replacement of all lines is being considered for fire prevention. Teflon lined fuel lines have been suggested. Any info is appreciated. Check yours after inactive periods. Turn on the fuel pump and inspect before "fire"ing it up!🔥 Douglas Jonak |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Mar 2011
Posts: 186
Likes: 0
Liked 28 Times in 15 Posts
|
![]()
leakage can occur in any flex line - not only CJ's. I have turned fuel pump on in Spring and had a puddle under Jeep - I check before firing up.
Don't know how old the line was - but everybody should check after down time or in Spring. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Nov 2003
Location: Out to Lunch
Posts: 190
Likes: 2
Liked 26 Times in 11 Posts
|
![]()
Doug, Check your PM
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2010
Location: Zimmerman, MN
Posts: 237
Likes: 25
Liked 0 Times in 0 Posts
|
![]()
Wayne,
Thanks for your input. Looking at option to replace with teflon lined fuel lines. Will eventually post my solution Thanks Doug |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2004
Location: Minneapolis
Posts: 788
Likes: 2,890
Liked 370 Times in 102 Posts
|
![]()
Watson Racing sells stainless hard lines, then you only need braided style lines for making short connections .
__________________
Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ" Last edited by JHeath; 01-17-2018 at 11:16 AM. Reason: addition |
![]() |
![]() |
![]() |
|
|