|
|
04-01-2019, 07:52 PM | #1 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,778
Likes: 70
Liked 400 Times in 191 Posts
|
Cable or rod
from carb to pedal and stock or aftermarket gas pedal assembly in your S/ST car.
Photos either here or PM if you're willing to share. Thanks in advance. |
04-02-2019, 09:45 AM | #2 |
VIP Member
Join Date: Jan 2003
Location: Allentown,PA
Posts: 2,436
Likes: 776
Liked 700 Times in 204 Posts
|
Re: Cable or rod
Advantages to both, much depends on the type of throttle stop being used.
An inline throttle stop will work as well as any under carb stop when using a cable . Most cars ,even with engine limiters still have too much engine movement to be precise using an inline stop with a rod setup. Biggest issue with a cable is space . The flimsy stock type or Lokar cables really aren't suited for the abuse of racing . I've always used Morse cables on cars I've built that utilized a cable ,but they can be a bit of a space problem under the dash of some door cars, plus using an inline stop with a cable will almost always necessitate mounting the carb backwards. With an under carb stop ,I would always build with rod linkage.
__________________
Tom Goldman 1500 SG , 1506 STK |
04-02-2019, 12:42 PM | #3 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,778
Likes: 70
Liked 400 Times in 191 Posts
|
Re: Cable or rod
Tom, thanks for your reply. Check your PM, thanks
|
04-03-2019, 01:49 PM | #4 |
Junior Member
Join Date: Apr 2010
Location: Hendersonville, Tn.
Posts: 80
Likes: 764
Liked 23 Times in 10 Posts
|
Re: Cable or rod
Cable with stock pedal and under carb stop.
|
04-03-2019, 03:49 PM | #5 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 1,778
Likes: 70
Liked 400 Times in 191 Posts
|
Re: Cable or rod
that is my current set up.
|
|
|