Headers

terry1 · 08-31-2014, 12:53 PM

Is any one making headers the "Jere Stahl" way?
I did notice, on his web site, that there is company called
Advance Composite Products that "may be".

Billy Nees · 08-31-2014, 01:46 PM

Advance Composite Products has bought Jere's benders and has employed Greg (20 years at Stahl) to build headers. Kerry Hitt owns ACP and is a good man and easy to deal with. I don't however have a phone # for ACP.

terry1 · 08-31-2014, 02:18 PM

Thanks, Billy, for the reply.
Hopefully some contact info will appear.
Terry K

Brian Fink · 08-31-2014, 03:13 PM

Advanced Composite Products (717) 232-8237 .

terry1 · 08-31-2014, 03:17 PM

Thanks Brian.
Terry K

Jim Cimarolli · 09-01-2014, 11:33 AM

I hope they get going well and build as good a product as Stahl was for decades.

Don Fardie · 05-20-2016, 09:25 PM

I know this is an old post, but in doing a search this came up. I just wanted to help spread the word for Greg at APC (Advance Composite Products), that he is still fabricating the Stahl headers. I just talked to him on Thursday and I guess Judy, who was still taking the orders up to last week had to resign to take care of Jere full time due to his health. He is also providing Step Headers, which I was inquiring about, but he is only building mild steel for now and hopes to be doing stainless within a year. I asked if they would represent the original Stahl and his reply was they are the original Stahl header! He’s using all the same fixtures and as it was previously posted Greg has been with Jere for 20 years plus.

Alan Roehrich · 05-20-2016, 09:44 PM

Greg told me at PRI in 2014 that he would only be building step headers, either one step (two diameters) or two step (three diameters), as he felt like it resulted in a better header, and a better value, as well as much easier fabricating and repairing.

terry1 · 05-21-2016, 08:25 AM

This is an old post.I got my headers from Greg at ACP in late '14. What a great set of headers! They are stepped of course, but I my case all the steeps are the same size,
1 3/4 ". The model # of my headers- "107".
Terry K

08-31-2014, 12:53 PM	#1
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Headers Is any one making headers the "Jere Stahl" way? I did notice, on his web site, that there is company called Advance Composite Products that "may be".

08-31-2014, 01:46 PM	#2
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,218 Likes: 3,091 Liked 6,772 Times in 1,519 Posts	Re: Headers Advance Composite Products has bought Jere's benders and has employed Greg (20 years at Stahl) to build headers. Kerry Hitt owns ACP and is a good man and easy to deal with. I don't however have a phone # for ACP. __________________ Billy Nees 1188 STK, SS Make tech "TECH" again!

08-31-2014, 02:18 PM	#3
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Headers Thanks, Billy, for the reply. Hopefully some contact info will appear. Terry K

08-31-2014, 03:13 PM	#4
Brian Fink Member Join Date: Jul 2007 Posts: 172 Likes: 35 Liked 28 Times in 9 Posts	Re: Headers Advanced Composite Products (717) 232-8237 .

08-31-2014, 03:17 PM	#5
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Headers Thanks Brian. Terry K

09-01-2014, 11:33 AM	#6
Jim Cimarolli Senior Member Join Date: Mar 2002 Location: Sulphur Springs Texas Posts: 728 Likes: 108 Liked 135 Times in 40 Posts	Re: Headers I hope they get going well and build as good a product as Stahl was for decades.

05-20-2016, 09:25 PM	#7
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: Headers I know this is an old post, but in doing a search this came up. I just wanted to help spread the word for Greg at APC (Advance Composite Products), that he is still fabricating the Stahl headers. I just talked to him on Thursday and I guess Judy, who was still taking the orders up to last week had to resign to take care of Jere full time due to his health. He is also providing Step Headers, which I was inquiring about, but he is only building mild steel for now and hopes to be doing stainless within a year. I asked if they would represent the original Stahl and his reply was they are the original Stahl header! He’s using all the same fixtures and as it was previously posted Greg has been with Jere for 20 years plus. __________________ Don Fardie 1582 F/S B/G

05-20-2016, 09:44 PM	#8
Alan Roehrich VIP Member Join Date: May 2006 Location: Murfreesboro TN Posts: 4,907 Likes: 993 Liked 1,032 Times in 270 Posts	Re: Headers Greg told me at PRI in 2014 that he would only be building step headers, either one step (two diameters) or two step (three diameters), as he felt like it resulted in a better header, and a better value, as well as much easier fabricating and repairing. __________________ Alan Roehrich 212A G/S

05-21-2016, 08:25 AM	#9
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Headers This is an old post.I got my headers from Greg at ACP in late '14. What a great set of headers! They are stepped of course, but I my case all the steeps are the same size, 1 3/4 ". The model # of my headers- "107". Terry K