|
03-02-2015, 12:19 AM | #1 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,759
Likes: 5
Liked 99 Times in 60 Posts
|
trans brake long throw switch style and mounting
I would like to see examples of trans brake switch mounts.
When I raced electronics with a delay box a small, wheel mounted switch was common. With the long throw delay type switches I "think" it will be clumsy to have the long stem mounted on the wheel. I expect with the Super 10 I will want a dash mounted bracket that positions the switch in a comfortable, easy position near the wheel. Let me see some examples.
__________________
Larry Woodfin 471W |
03-04-2015, 03:47 PM | #2 |
Senior Member
Join Date: Sep 2006
Location: Bellevue Ohio
Posts: 985
Likes: 0
Liked 12 Times in 9 Posts
|
Re: trans brake long throw switch style and mounting
Larry, don't have any pics but for my long throw button I made a clam shell mount that attaches to my "eyebrow" bar welded a short piece of 5/8 then put a piece of 1/2 inch inside with a thumb screw so I could move it up or down or angle it. Basically it hangs from the roof.
__________________
Joe Buchanan SS/BX 3117 |
|
|